36 open source boards using the C7519

Real designs built with the C7519, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

36 boardsClear filters|Most starred

How designs wire the C7519

Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the C7519 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBUS pin has a decoupling capacitor on 9 of 22 designs, most often 100 nF (then 10 µF).
I/O1pin 1, 6Connected to: A connector 59%
  • Series resistor on 32% · 27 Ω (3), 10 kΩ (3), 0 Ω (2)
GNDpin 2Connected to: GND 100%
VBUSpin 5Connected to: 5V 73% · a signal 23%
  • Decoupling capacitor on 41% · 100 nF (10), 10 µF (4), 2.2 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main board by JesusFreke, LuxDMX by tombueng, Usb fm radio by anttikes and Esp32-emu turbo by pjcau.

The C7519 in open source designs

The gallery holds 36 open source boards using the C7519 from 24 GitHub repositories; a typical one measures about 100 × 79.5 mm and carries around 94 components.

74% use four copper layers or more, and 11% carry an open source license.

The most starred is Main board by JesusFreke.

Parts used alongside the C7519

Microcontrollers on boards using the C7519

C7519: common questions

Where can I find a C7519 reference design?

Each of the 36 boards on this page is a real design using the C7519. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the C7519 VBUS pin?

The VBUS pin has a decoupling capacitor on 9 of 22 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the C7519.

What parts are used alongside the C7519?

The C6186, C97521, C2040, C15742 and C78988 appear in the most repositories here.

Which microcontrollers do boards using the C7519 use?

Most are built on STM32 (12), RISC-V (11), ESP32 (6) and RP2040/RP2350 (4).

How big is a typical board using the C7519?

The median is 100 × 79.5 mm, and 26% are two-layer designs.

What is the most popular open source board using the C7519?

By GitHub stars, Main board by JesusFreke, with 993 stars.

Can I simulate one of these boards using the C7519 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part