14 open source boards using the C5947

Real designs built with the C5947, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the C5947

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the C5947 connects to, and the resistors, capacitors and other passives placed on it.

  • The QC pin has a series resistor on 6 of 8 designs, most often 1 kΩ (then 220 Ω).
  • The QB pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 0 Ω).
  • The QD pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 0 Ω).
  • The QE pin has a series resistor on 4 of 8 designs, most often 0 Ω (then 470 Ω).
QBpin 1Connected to: Signal 88%
  • Series resistor on 63% · 220 Ω (1), 0 Ω (1), 470 Ω (1)
QCpin 2Connected to: Signal 100%
  • Series resistor on 75% · 1 kΩ (2), 220 Ω (1), 0 Ω (1)
QDpin 3Connected to: Signal 88%
  • Series resistor on 63% · 220 Ω (1), 0 Ω (1), 470 Ω (1)
QEpin 4Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 0 Ω (1), 470 Ω (1), 1 kΩ (1)
QFpin 5Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 0 Ω (1), 470 Ω (1), 1 kΩ (1)
QGpin 6Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 1 kΩ (2), 470 Ω (1), 1.5 kΩ (1)
QHpin 7Connected to: Signal 63% · not connected 38%
  • Series resistor on 50% · 470 Ω (1), 100 Ω (1), 1 kΩ (1)
GNDpin 8Connected to: GND 88%
OEpin 13Connected to: GND 50% · a signal 50%
  • Pull-up to 3.3V on 38% · 10 kΩ (2), 1 kΩ (1)
QApin 15Connected to: Signal 100%
  • Series resistor on 50% · 220 Ω (1), 470 Ω (1), 1 kΩ (1)
VCCpin 16Connected to: 3.3V 88%
  • Decoupling capacitor on 38% · 100 nF (4), 10 µF (3), 10 nF (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hat modder by bitfieldlabs, Bd845-pwb board by bluedot-arcade, Core-64c-Compact-Interactive-Core-Memory-Badge by ageppert and Digital test board by Benjamin-girard-1.

The C5947 in open source designs

The gallery holds 14 open source boards using the C5947 from 8 GitHub repositories; a typical one measures about 190 × 110 mm and carries around 262 components.

64% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.

The most starred is Hat modder by bitfieldlabs.

Microcontrollers on boards using the C5947

C5947: common questions

Where can I find a C5947 reference design?

Each of the 14 boards on this page is a real design using the C5947. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the C5947 QC pin?

The QC pin has a series resistor on 6 of 8 designs, most often 1 kΩ (then 220 Ω). Counted from the KiCad layouts of 8 open source designs using the C5947.

What resistor goes on the C5947 QB pin?

The QB pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 0 Ω). Counted from the KiCad layouts of 8 open source designs using the C5947.

What resistor goes on the C5947 QD pin?

The QD pin has a series resistor on 5 of 8 designs, most often 220 Ω (then 0 Ω). Counted from the KiCad layouts of 8 open source designs using the C5947.

Which microcontrollers do boards using the C5947 use?

Most are built on ESP32 (8) and STM32 (1).

How big is a typical board using the C5947?

The median is 190 × 110 mm, and 64% are two-layer designs.

What is the most popular open source board using the C5947?

By GitHub stars, Hat modder by bitfieldlabs, with 32 stars.

Can I simulate one of these boards using the C5947 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part