2 open source boards using the Check_Point
Real designs built with the Check_Point, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Radar v2
ckflight
90.2 × 40 mm264 parts4LGPL-3.055
STM32Radar v2
TonyStark2007
90.2 × 40 mm264 parts4LGPL-3.015
The Check_Point in open source designs
The gallery holds 2 open source boards using the Check_Point from 2 GitHub repositories; a typical one measures about 90.2 × 40 mm and carries around 264 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Radar v2 by ckflight.
Parts used alongside the Check_Point
Microcontrollers on boards using the Check_Point
What boards using the Check_Point are built for
Check_Point: common questions
Where can I find a Check_Point reference design?
Each of the 2 boards on this page is a real design using the Check_Point. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the Check_Point?
The 5400BL15B050E, ADC_Connector, ADF4158, ADL5801 and AP3211 appear in the most repositories here.
Which microcontrollers do boards using the Check_Point use?
Most are built on STM32 (2).
How big is a typical board using the Check_Point?
The median is 90.2 × 40 mm, and 0% are two-layer designs.
What is the most popular open source board using the Check_Point?
By GitHub stars, Radar v2 by ckflight, with 55 stars.
Can I simulate one of these boards using the Check_Point before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.