2 open source boards using the DRV120PWR

Real designs built with the DRV120PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The DRV120PWR in open source designs

The gallery holds 2 open source boards using the DRV120PWR from 2 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 219 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Simple by theacodes.

Microcontrollers on boards using the DRV120PWR

DRV120PWR: common questions

Where can I find a DRV120PWR reference design?

Each of the 2 boards on this page is a real design using the DRV120PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the DRV120PWR?

The 74HC2G34GW,125, MAX3078EESA, MIC5317-3.3YD5, PCA9545APW, PCA9545BPW, PCA9545CPW and RP2040 appear in the most repositories here.

Which microcontrollers do boards using the DRV120PWR use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the DRV120PWR?

The median is 100 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the DRV120PWR?

By GitHub stars, Simple by theacodes, with 1,143 stars.

Can I simulate one of these boards using the DRV120PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part