12 open source boards using the W25Q64JVS
Real designs built with the W25Q64JVS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Starfish
theacodes
100 × 100 mm220 parts4LMIT1.1kRP2040/RP2350
Starfish
wntrblm
100 × 100 mm220 parts4LCC-BY-NC-4.0111RP2040/RP2350
Starfish
grokicad
100 × 100 mm220 parts4LNo license26RP2040/RP2350
MiSTle - GW3A LV20 LQ144 Development Board
MiSTle-Dev
110 × 67 mm167 parts2LNo license22RP2040/RP2350
Starfish
clintonimaroo
100 × 100 mm220 parts4LNo license0ESP8266
MB02A2
GOS2022
130 × 105 mm96 parts2LMIT0RP2040/RP2350
Simple
theacodes
100 × 100 mm219 parts4LMIT1.1kRP2040/RP2350
Jellyfish
wntrblm
80 × 70 mm142 parts4LCC-BY-NC-4.0111RP2040/RP2350
Simple
grokicad
100 × 100 mm219 parts4LNo license26RP2040/RP2350
Misterydev20k
MiSTle-Dev
90 × 67 mm162 parts2LNo license22Keyboard
MiSTle-Dev
222.3 × 63 mm144 parts2LNo license22RP2040/RP2350
MiSTle - Icepi-Zero Carrier
MiSTle-Dev
42.8 × 81.8 mm73 parts2LNo license22
How designs wire the W25Q64JVS
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the W25Q64JVS connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
- The CS pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 83% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 83% · a signal 17% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Simple by theacodes, Jellyfish by wntrblm, Simple by grokicad and MiSTle - Icepi-Zero Carrier by MiSTle-Dev.
The W25Q64JVS in open source designs
The gallery holds 12 open source boards using the W25Q64JVS from 6 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 193 components.
58% use four copper layers or more, and 25% carry an open source license.
The most starred is Starfish by theacodes.
Parts used alongside the W25Q64JVS
Microcontrollers on boards using the W25Q64JVS
What boards using the W25Q64JVS are built for
W25Q64JVS: common questions
Where can I find a W25Q64JVS reference design?
Each of the 12 boards on this page is a real design using the W25Q64JVS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q64JVS VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the W25Q64JVS.
What pull-up resistor is used on the W25Q64JVS CS pin?
The CS pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the W25Q64JVS.
What parts are used alongside the W25Q64JVS?
The RP2040, 74HC2G34GW,125, MAX3078EESA, MIC5317-3.3YD5 and PCA9545APW, PCA9545BPW, PCA9545CPW appear in the most repositories here.
Which microcontrollers do boards using the W25Q64JVS use?
Most are built on RP2040/RP2350 (10) and ESP8266 (1).
How big is a typical board using the W25Q64JVS?
The median is 100 × 100 mm, and 42% are two-layer designs.
What is the most popular open source board using the W25Q64JVS?
By GitHub stars, Starfish by theacodes, with 1,143 stars.
Can I simulate one of these boards using the W25Q64JVS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.