10 open source boards using the VX7805-500
Real designs built with the VX7805-500, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Starfish
theacodes
100 × 100 mm220 parts4LMIT1.1kRP2040/RP2350
Starfish
wntrblm
100 × 100 mm220 parts4LCC-BY-NC-4.0111Board
wntrblm
100 × 30 mm34 parts2LCC-BY-SA-4.042RP2040/RP2350
Starfish
grokicad
100 × 100 mm220 parts4LNo license26FlippyDriver
NietoSkunk
189.4 × 59.1 mm310 parts4LMIT10NXP
Pewpew laserboard
matthewSorensen
80 × 95 mm119 parts2LCERN-OHL-S-2.010RP2040/RP2350
Starfish
clintonimaroo
100 × 100 mm220 parts4LNo license0RP2040/RP2350
Simple
theacodes
100 × 100 mm219 parts4LMIT1.1kRP2040/RP2350
Jellyfish
wntrblm
80 × 70 mm142 parts4LCC-BY-NC-4.0111RP2040/RP2350
Simple
grokicad
100 × 100 mm219 parts4LNo license26
How designs wire the VX7805-500
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the VX7805-500 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 7 of 7 designs, most often 10 µF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 24V 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VOUTpin 3 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Simple by theacodes, Jellyfish by wntrblm, Board by wntrblm and Simple by grokicad.
The VX7805-500 in open source designs
The gallery holds 10 open source boards using the VX7805-500 from 7 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 220 components.
80% use four copper layers or more, and 50% carry an open source license.
The most starred is Starfish by theacodes.
Parts used alongside the VX7805-500
Microcontrollers on boards using the VX7805-500
What boards using the VX7805-500 are built for
VX7805-500: common questions
Where can I find a VX7805-500 reference design?
Each of the 10 boards on this page is a real design using the VX7805-500. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the VX7805-500 VIN pin?
The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the VX7805-500.
What decoupling capacitors do designs use on the VX7805-500 VOUT pin?
The VOUT pin has a decoupling capacitor on 7 of 7 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the VX7805-500.
What parts are used alongside the VX7805-500?
The 74HC2G34GW,125, MAX3078EESA, MIC5317-3.3YD5, PCA9545APW, PCA9545BPW, PCA9545CPW and RP2040 appear in the most repositories here.
Which microcontrollers do boards using the VX7805-500 use?
Most are built on RP2040/RP2350 (7) and NXP (1).
How big is a typical board using the VX7805-500?
The median is 100 × 100 mm, and 20% are two-layer designs.
What is the most popular open source board using the VX7805-500?
By GitHub stars, Starfish by theacodes, with 1,143 stars.
Can I simulate one of these boards using the VX7805-500 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.