8 open source boards using the XGZP6857D
Real designs built with the XGZP6857D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kRP2040/RP2350
Starfish
theacodes
100 × 100 mm220 parts4LMIT1.1kRP2040/RP2350
Starfish
wntrblm
100 × 100 mm220 parts4LCC-BY-NC-4.0111RP2040/RP2350
Starfish
grokicad
100 × 100 mm220 parts4LNo license26STM32
OpenPNP mobo
jaytektas
180 × 140 mm382 parts4LNo license0RP2040/RP2350
Starfish
clintonimaroo
100 × 100 mm220 parts4LNo license0RP2040/RP2350
Simple
theacodes
100 × 100 mm219 parts4LMIT1.1kRP2040/RP2350
Simple
grokicad
100 × 100 mm219 parts4LNo license26
How designs wire the XGZP6857D
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the XGZP6857D connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 6 of 6 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCL pin has a pull-up to 3.3V on 6 of 6 designs, most often 4.7 kΩ (then 10 kΩ).
- The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 3 | Connected to: Not connected 100% | — |
| VDDpin 2 | Connected to: 3.3V 100% |
|
| SDApin 4 | Connected to: PCA9545APW, PCA9545BPW, PCA9545CPW 67% |
|
| SCLpin 5 | Connected to: PCA9545APW, PCA9545BPW, PCA9545CPW 67% |
|
| GNDpin 6 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LumenPnP Motherboard by opulo-inc, Simple by theacodes, Starfish by wntrblm and Simple by grokicad.
The XGZP6857D in open source designs
The gallery holds 8 open source boards using the XGZP6857D from 6 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 220 components.
100% use four copper layers or more, and 38% carry an open source license.
The most starred is LumenPnP Motherboard by opulo-inc.
Parts used alongside the XGZP6857D
Microcontrollers on boards using the XGZP6857D
What boards using the XGZP6857D are built for
XGZP6857D: common questions
Where can I find a XGZP6857D reference design?
Each of the 8 boards on this page is a real design using the XGZP6857D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the XGZP6857D SDA pin?
The SDA pin has a pull-up to 3.3V on 6 of 6 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the XGZP6857D.
What pull-up resistor is used on the XGZP6857D SCL pin?
The SCL pin has a pull-up to 3.3V on 6 of 6 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the XGZP6857D.
What decoupling capacitors do designs use on the XGZP6857D VDD pin?
The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the XGZP6857D.
What parts are used alongside the XGZP6857D?
The 74HC2G34GW,125, MAX3078EESA, MIC5317-3.3YD5, PCA9545APW, PCA9545BPW, PCA9545CPW and RP2040 appear in the most repositories here.
Which microcontrollers do boards using the XGZP6857D use?
Most are built on RP2040/RP2350 (6) and STM32 (2).
How big is a typical board using the XGZP6857D?
The median is 100 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the XGZP6857D?
By GitHub stars, LumenPnP Motherboard by opulo-inc, with 3,655 stars.
Can I simulate one of these boards using the XGZP6857D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.