5 open source boards using the ES8311
Real designs built with the ES8311, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Live caption badge
fakefred
170 × 105.1 mm109 parts4LNo license1ESP32
Doorbell controller
gunnarbeutner
64 × 59 mm102 parts4LMIT1FPGA
Eurorack-DIGI
cookiemonsternz
40 × 100 mm127 parts6LNo license0ESP32
Pixel snap voice
zeeman-effect
64 × 86 mm55 parts4LNo license0Audio breakout
pui4
21.4 × 34 mm28 parts2LNo license0
How designs wire the ES8311
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ES8311 connects to, and the resistors, capacitors and other passives placed on it.
- The AVDD_11 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF).
- The DACVREF_14 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 10 µF).
- The ADCVREF_15 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF.
- The VMID_16 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CCLK_1pin 1 | Connected to: The microcontroller 80%, a connector 40% |
|
| PVDD_3pin 3 | Connected to: 3.3V 80% · a signal 20% |
|
| DVDD_4pin 4 | Connected to: 3.3V 80% · a signal 20% |
|
| DGND_5pin 5 | Connected to: GND 100% | — |
| AGND_10pin 10 | Connected to: GND 100% | — |
| AVDD_11pin 11 | Connected to: AVDD 60% · a signal 40% |
|
| OUTP_12pin 12 | Connected to: Signal 100% |
|
| OUTN_13pin 13 | Connected to: Signal 100% |
|
| DACVREF_14pin 14 | Connected to: Signal 100% |
|
| ADCVREF_15pin 15 | Connected to: Signal 100% |
|
| VMID_16pin 16 | Connected to: Signal 100% |
|
| MIC1N_17pin 17 | Connected to: Signal 80% · not connected 20% |
|
| MIC1P/DMIC_SDA_18pin 18 | Connected to: Signal 80% · not connected 20% |
|
| CDATA_19pin 19 | Connected to: The microcontroller 80%, a connector 40% |
|
| CE_20pin 20 | Connected to: GND 40% · VDD33 20% · a signal 40% |
|
| EP_21pin 21 | Connected to: GND 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Live caption badge by fakefred, Doorbell controller by gunnarbeutner, Eurorack-DIGI by cookiemonsternz and Audio breakout by pui4.
The ES8311 in open source designs
The gallery holds 5 open source boards using the ES8311 from 5 GitHub repositories; a typical one measures about 64 × 86 mm and carries around 102 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is Live caption badge by fakefred.
What boards using the ES8311 are built for
ES8311: common questions
Where can I find a ES8311 reference design?
Each of the 5 boards on this page is a real design using the ES8311. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ES8311 AVDD_11 pin?
The AVDD_11 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the ES8311.
How is the ES8311 DACVREF_14 pin connected?
The DACVREF_14 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ES8311.
How is the ES8311 ADCVREF_15 pin connected?
The ADCVREF_15 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the ES8311.
Which microcontrollers do boards using the ES8311 use?
Most are built on ESP32 (3) and FPGA (1).
How big is a typical board using the ES8311?
The median is 64 × 86 mm, and 20% are two-layer designs.
What is the most popular open source board using the ES8311?
By GitHub stars, Live caption badge by fakefred, with 1 stars.
Can I simulate one of these boards using the ES8311 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.