8 open source boards using the FT245RL
Real designs built with the FT245RL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Pican usb
marcinbor85
89.8 × 55.3 mm42 parts2LGPL-3.04Sd mux
3mdeb
50 × 114 mm48 parts2LApache-2.08Sd mux
emaste
50 × 114 mm48 parts2LApache-2.02FPGA
Ferk-Cart iCE40 Devboard
nelgau
59.2 × 49.2 mm120 parts4LNo license1Sd mux
3mdeb
50 × 114 mm48 parts2LApache-2.01Sd mux
capotosto
50 × 114 mm48 parts2LApache-2.00Sd mux
agners
50 × 114 mm48 parts2LApache-2.00Sd mux
moto-timo
50 × 114 mm48 parts2LApache-2.00
How designs wire the FT245RL
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the FT245RL connects to, and the resistors, capacitors and other passives placed on it.
- Pin 17 has a decoupling capacitor on 8 of 8 designs, most often 100 nF.
- Pin 12 has a pull-up to VDD on 7 of 8 designs, most often 10 kΩ.
- Pin 20 has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF).
- Pin 7 is tied to GND on 8 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 74AHC1G14 75%, TS3A27518E 75%, the microcontroller 25% |
|
| Pin 2 | Connected to: The microcontroller 25% |
|
| Pin 3 | Connected to: The microcontroller 25% |
|
| Pin 4 | Connected to: VDD 88% | — |
| Pin 5 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 6 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Not connected 100% | — |
| Pin 9 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 10 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 11 | Connected to: 74AHC1G14 75%, TS3USB30EDGSR 75%, the microcontroller 25% |
|
| Pin 12 | Connected to: Signal 100% |
|
| Pin 13 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 14 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 17 | Connected to: 3.3V 75% · a signal 25% |
|
| Pin 18 | Connected to: GND 100% | — |
| Pin 19 | Connected to: Not connected 75% | — |
| Pin 20 | Connected to: VDD 88% |
|
| Pin 21 | Connected to: GND 100% | — |
| Pin 22 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 23 | Connected to: Not connected 75% · a signal 25% | — |
| Pin 24 | Connected to: Not connected 100% | — |
| Pin 25 | Connected to: GND 100% | — |
| Pin 26 | Connected to: GND 88% | — |
| Pin 27 | Connected to: Not connected 88% | — |
| Pin 28 | Connected to: Not connected 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd mux by 3mdeb, Pican usb by marcinbor85, Sd mux by emaste and Sd mux by 3mdeb.
The FT245RL in open source designs
The gallery holds 8 open source boards using the FT245RL from 8 GitHub repositories; a typical one measures about 50 × 114 mm and carries around 48 components.
88% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is Sd mux by 3mdeb.
Parts used alongside the FT245RL
What boards using the FT245RL are built for
FT245RL: common questions
Where can I find a FT245RL reference design?
Each of the 8 boards on this page is a real design using the FT245RL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the FT245RL pin 17?
Pin 17 has a decoupling capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the FT245RL.
What pull-up resistor is used on the FT245RL pin 12?
Pin 12 has a pull-up to VDD on 7 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the FT245RL.
What decoupling capacitors do designs use on the FT245RL pin 20?
Pin 20 has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the FT245RL.
What parts are used alongside the FT245RL?
The 74AHC1G14, TS3A27518E, TS3USB30EDGSR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the FT245RL use?
Most are built on FPGA (1) and PIC (1).
How big is a typical board using the FT245RL?
The median is 50 × 114 mm, and 88% are two-layer designs.
What is the most popular open source board using the FT245RL?
By GitHub stars, Sd mux by 3mdeb, with 8 stars.
Can I simulate one of these boards using the FT245RL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.