9 open source boards using the ICE40UP5K-SG48

Real designs built with the ICE40UP5K-SG48, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the ICE40UP5K-SG48

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ICE40UP5K-SG48 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCIO_2 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 2.2 µF).
  • The VCC pins have a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The SPI_VCCIO1 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VCCPLL pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 10 µF).
VCCIO_2pin 1Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (7), 2.2 µF (1), 1 µF (1)
VCCpin 5, 30Connected to: 1.2V 77% · a signal 23%
  • Decoupling capacitor on 86% · 100 nF (11), 1 µF (10), 10 nF (5)
IOB_13Bpin 6Connected to: Signal 83% · not connected 17%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
CDONEpin 7Connected to: A connector 50%
  • Pull-up to 3.3V on 50% · 2.2 kΩ (2), 10 kΩ (1)
CRESET_Bpin 8Connected to: A connector 50%, the microcontroller 33%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
IOB_18Apin 10Connected to: A connector 33% · GND 17%
  • Series resistor on 33% · 33 Ω (2), 1.5 kΩ (1)
IOB_20Apin 11Connected to: A connector 50% · GND 17%
  • Series resistor on 33% · 33 Ω (2), 1.5 kΩ (1)
IOB_22Apin 12Connected to: A connector 33% · GND 17%
  • Series resistor on 33% · 33 Ω (2)
IOB_24Apin 13Connected to: A connector 50%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
IOB_31Bpin 18Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 1.5 kΩ (1), 33 Ω (1)
IOB_23Bpin 21Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (3)
SPI_VCCIO1pin 22Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (9), 1 µF (3), 10 nF (2)
IOT_37Apin 23Connected to: A connector 50%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
VPP_2V5pin 24Connected to: 2.5V 67% · a signal 33%
  • Decoupling capacitor on 83% · 100 nF (3), 1 µF (2), 10 nF (1)
IOT_39Apin 26Connected to: A connector 67%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
IOT_38Bpin 27Connected to: A connector 67%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
IOT_41Apin 28Connected to: A connector 33% · GND 17%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
VCCPLLpin 29Connected to: VCCPLL 57% · a signal 43%
  • Decoupling capacitor on 86% · 100 nF (5), 10 µF (3), 1 µF (2)
IOT_42Bpin 31Connected to: A connector 50%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
IOT_43Apin 32Connected to: A connector 50%
  • Series resistor on 33% · 10 kΩ (1), 33 Ω (1)
VCCIO_0pin 33Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (8), 10 nF (1), 1 µF (1)
IOT_44Bpin 34Connected to: A connector 67%
  • Series resistor on 33% · 27 Ω (1), 68 Ω (1)
IOT_48Bpin 36Connected to: A connector 50% · GND 17%
  • Series resistor on 50% · 330 Ω (1), 27 Ω (1), 68 Ω (1)
IOT_45A_G1pin 37Connected to: A connector 50%
  • Series resistor on 50% · 27 Ω (1), 1.5 kΩ (1), 33 Ω (1)
IOT_50Bpin 38Connected to: A connector 33% · not connected 17%
  • Series resistor on 50% · 10 kΩ (1), 33 Ω (1)
IOT_51Apin 42Connected to: A connector 50% · not connected 17%
  • Series resistor on 33% · 10 kΩ (1)
PAD/GNDpin 49Connected to: GND 100%

21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pogobot Head by nekonaute, Iceskate by icerink, IcE1usb by osmocom and Minitoy by al177.

The ICE40UP5K-SG48 in open source designs

The gallery holds 9 open source boards using the ICE40UP5K-SG48 from 7 GitHub repositories; a typical one measures about 58.5 × 41.6 mm and carries around 116 components.

78% use four copper layers or more, and 33% carry an open source license.

The most starred is Pogobot Head by nekonaute.

Parts used alongside the ICE40UP5K-SG48

Microcontrollers on boards using the ICE40UP5K-SG48

ICE40UP5K-SG48: common questions

Where can I find a ICE40UP5K-SG48 reference design?

Each of the 9 boards on this page is a real design using the ICE40UP5K-SG48. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ICE40UP5K-SG48 VCCIO_2 pin?

The VCCIO_2 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 7 open source designs using the ICE40UP5K-SG48.

What decoupling capacitors do designs use on the ICE40UP5K-SG48 VCC pin?

The VCC pins have a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the ICE40UP5K-SG48.

What decoupling capacitors do designs use on the ICE40UP5K-SG48 SPI_VCCIO1 pin?

The SPI_VCCIO1 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the ICE40UP5K-SG48.

Which microcontrollers do boards using the ICE40UP5K-SG48 use?

Most are built on FPGA (6), STM32 (2) and ESP8266 (1).

How big is a typical board using the ICE40UP5K-SG48?

The median is 58.5 × 41.6 mm, and 22% are two-layer designs.

What is the most popular open source board using the ICE40UP5K-SG48?

By GitHub stars, Pogobot Head by nekonaute, with 21 stars.

Can I simulate one of these boards using the ICE40UP5K-SG48 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part