4 open source boards using the ID_LM66100DCKR

Real designs built with the ID_LM66100DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ID_LM66100DCKR in open source designs

The gallery holds 4 open source boards using the ID_LM66100DCKR from 2 GitHub repositories; a typical one measures about 69.5 × 61.3 mm and carries around 120 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is QRET 25-26 SRAD Hybrid Lower Control Module by Queens-Rocket-Engineering-Team.

Microcontrollers on boards using the ID_LM66100DCKR

What boards using the ID_LM66100DCKR are built for

ID_LM66100DCKR: common questions

Where can I find a ID_LM66100DCKR reference design?

Each of the 4 boards on this page is a real design using the ID_LM66100DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ID_LM66100DCKR?

The ADC_ADS131M04IPWR, AMS1117-3.3, BY25Q128ES, CP2102N-Axx-xQFN20 and DMP4065S-7 appear in the most repositories here.

Which microcontrollers do boards using the ID_LM66100DCKR use?

Most are built on ESP32 (2) and STM32 (2).

How big is a typical board using the ID_LM66100DCKR?

The median is 69.5 × 61.3 mm, and 0% are two-layer designs.

What is the most popular open source board using the ID_LM66100DCKR?

By GitHub stars, QRET 25-26 SRAD Hybrid Lower Control Module by Queens-Rocket-Engineering-Team, with 2 stars.

Can I simulate one of these boards using the ID_LM66100DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part