9 open source boards using the IMU_MOUNT
Real designs built with the IMU_MOUNT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoORA Control Board Rev 1
gtrupiano
100 × 60 mm65 parts2LNo license0
AVR/ArduinoORA Control Board Rev 1
oaklandrobotics
100 × 60 mm65 parts2LNo license0
AVR/ArduinoORA CONTROLBOARD REV1
100 × 60 mm65 parts2LNo license0
AVR/ArduinoORA Control Board Rev 1.1
100 × 60 mm65 parts2LNo license0
AVR/ArduinoORA Control Board Rev 2
100 × 52.5 mm61 parts2LNo license0
AVR/ArduinoORA Control Board Rev 2
100 × 52.5 mm61 parts2LNo license0
AVR/ArduinoORA Control Board Rev 2.1
100 × 52.5 mm60 parts2LNo license0
AVR/ArduinoORA Control Board Rev 2.1
100 × 52.5 mm60 parts2LNo license0
AVR/ArduinoORA ControlBoard main Rev2
100 × 52.5 mm60 parts2LNo license0
The IMU_MOUNT in open source designs
The gallery holds 9 open source boards using the IMU_MOUNT from 2 GitHub repositories; a typical one measures about 100 × 52.5 mm and carries around 61 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ORA Control Board Rev 1.1 by gtrupiano.
Parts used alongside the IMU_MOUNT
Microcontrollers on boards using the IMU_MOUNT
What boards using the IMU_MOUNT are built for
IMU_MOUNT: common questions
Where can I find a IMU_MOUNT reference design?
Each of the 9 boards on this page is a real design using the IMU_MOUNT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the IMU_MOUNT?
The ATmega32U4-A, MCP2515-xSO, MCP2551-I-SN, MCP25625-x-SS and NCP1117-5.0_SOT223 appear in the most repositories here.
Which microcontrollers do boards using the IMU_MOUNT use?
Most are built on AVR/Arduino (9).
How big is a typical board using the IMU_MOUNT?
The median is 100 × 52.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the IMU_MOUNT?
By GitHub stars, ORA Control Board Rev 1.1 by gtrupiano, with 0 stars.
Can I simulate one of these boards using the IMU_MOUNT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.