2 open source boards using the LD39050_3V3

Real designs built with the LD39050_3V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LD39050_3V3 in open source designs

The gallery holds 2 open source boards using the LD39050_3V3 from 2 GitHub repositories; a typical one measures about 88 × 88 mm and carries around 13 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Pump by EpicQuestBio.

Microcontrollers on boards using the LD39050_3V3

LD39050_3V3: common questions

Where can I find a LD39050_3V3 reference design?

Each of the 2 boards on this page is a real design using the LD39050_3V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LD39050_3V3?

The ABP2_005PG_TRANS, ABP2_015PG_CIS, DRV8837C, STM32G431CBU6 and STUSB4500 appear in the most repositories here.

Which microcontrollers do boards using the LD39050_3V3 use?

Most are built on STM32 (2).

How big is a typical board using the LD39050_3V3?

The median is 88 × 88 mm, and 0% are two-layer designs.

What is the most popular open source board using the LD39050_3V3?

By GitHub stars, Pump by EpicQuestBio, with 0 stars.

Can I simulate one of these boards using the LD39050_3V3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part