7 open source boards using the LM2776DBVR
Real designs built with the LM2776DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
ICE40hxk4 dev board
smartbench
67 × 157 mm379 parts4LNo license2FPGA
Scopefun hardware
snhobbs
100 × 160 mm589 parts6LCustom license0AVR/Arduino
BDCMotorController
nunosousa
203.5 × 90 mm313 parts4LMIT0STM32
Basestation rx-V2
AntonSievering
100 × 100 mm292 parts4LNo license0STM32
Readout 60pin
opentac
37 × 34.3 mm54 parts4LMIT0NXP
Readout 64x64 regulated
tactilearena
91.9 × 56.3 mm56 parts4LMIT1Readout 30pin bottom
opentac
16 × 22.7 mm19 parts2LMIT0
How designs wire the LM2776DBVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LM2776DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- The VIN pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The C1+ pin has a series capacitor on 6 of 6 designs, most often 1 µF.
- The C1- pin has a series capacitor on 6 of 6 designs, most often 1 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: -5V 50% · a signal 50% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VINpin 3 | Connected to: 5V 100% |
|
| ENpin 4 | Connected to: 5V 83% · a signal 17% | — |
| C1+pin 5 | Connected to: Signal 100% |
|
| C1-pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ICE40hxk4 dev board by smartbench, Readout 64x64 regulated by tactilearena, Basestation rx-V2 by AntonSievering and BDCMotorController by nunosousa.
The LM2776DBVR in open source designs
The gallery holds 7 open source boards using the LM2776DBVR from 6 GitHub repositories; a typical one measures about 91.9 × 90 mm and carries around 292 components.
86% use four copper layers or more, and 57% carry an open source license.
The most starred is ICE40hxk4 dev board by smartbench.
Parts used alongside the LM2776DBVR
Microcontrollers on boards using the LM2776DBVR
What boards using the LM2776DBVR are built for
LM2776DBVR: common questions
Where can I find a LM2776DBVR reference design?
Each of the 7 boards on this page is a real design using the LM2776DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LM2776DBVR VOUT pin?
The VOUT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the LM2776DBVR.
What decoupling capacitors do designs use on the LM2776DBVR VIN pin?
The VIN pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the LM2776DBVR.
How is the LM2776DBVR C1+ pin connected?
The C1+ pin has a series capacitor on 6 of 6 designs, most often 1 µF. Counted from the KiCad layouts of 6 open source designs using the LM2776DBVR.
Which microcontrollers do boards using the LM2776DBVR use?
Most are built on FPGA (2), STM32 (2), AVR/Arduino (1) and NXP (1).
How big is a typical board using the LM2776DBVR?
The median is 91.9 × 90 mm, and 14% are two-layer designs.
What is the most popular open source board using the LM2776DBVR?
By GitHub stars, ICE40hxk4 dev board by smartbench, with 2 stars.
Can I simulate one of these boards using the LM2776DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.