14 open source boards using the LM5155DSSR
Real designs built with the LM5155DSSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Audio mixer
21bsirota
173.5 × 187.5 mm788 parts4LNo license0ESP32
Tankervision pdb
ikeefe12
100 × 100 mm444 parts4LNo license0Main supply 4 VM
Thinkpad4by3
100 × 100 mm194 parts2LNo license5Jetson Orin Baseboard
AtlasAutoware
120 × 90 mm312 parts8LNo license0Main supply 3
Thinkpad4by3
100 × 100 mm186 parts2LNo license5Main supply 3 revised
Thinkpad4by3
100 × 100 mm173 parts2LNo license5Deflection board
Thinkpad4by3
100 × 87 mm171 parts2LNo license5Boost Electrical Draft
AnishLanka
54.2 × 26.5 mm25 parts2LNo license1Deflection board 2
Thinkpad4by3
91.5 × 90.3 mm144 parts2LNo license5HowlandPump-AnishWork
AnishLanka
56 × 70 mm19 parts2LNo license1CRT main supply 2
Thinkpad4by3
100 × 100 mm103 parts2LNo license5HowlandPump-AnishWorkBackout
AnishLanka
56 × 70 mm19 parts2LNo license1HowlandPump-AnishWorkFINAL
AnishLanka
56 × 70 mm19 parts2LNo license1CRT main supply
Thinkpad4by3
100 × 70 mm63 parts2LNo license5
How designs wire the LM5155DSSR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM5155DSSR connects to, and the resistors, capacitors and other passives placed on it.
- The CS_5 pin has a series resistor on 4 of 5 designs, most often 909 Ω (then 1 kΩ).
- The BIAS_1 pin has a series resistor on 3 of 5 designs, most often 500 kΩ (then 110 kΩ).
- The FB pin has a capacitor to GND on 3 of 5 designs, most often 1 µF (then 2.2 µF).
- The CS_5 pin has a capacitor to GND on 3 of 5 designs, most often 100 pF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BIAS_1pin 1 | Connected to: Signal 60% · 12V 40% |
|
| FBpin 2 | Connected to: Signal 60% · VCC_BOOST 40% |
|
| PGND_4pin 4 | Connected to: GND 60% · a signal 40% | — |
| CS_5pin 5 | Connected to: Signal 100% |
|
| COMP_6pin 6 | Connected to: Signal 80% · not connected 20% |
|
| AGND_7pin 7 | Connected to: GND 60% · a signal 40% | — |
| FB_8pin 8 | Connected to: Signal 80% · GND 20% |
|
| SS_9pin 9 | Connected to: Signal 80% · GND 20% |
|
| RT_10pin 10 | Connected to: Signal 100% |
|
| UVLO_SYNC_12pin 12 | Connected to: 12V 50% · a signal 50% |
|
| EP_13pin 13 | Connected to: GND 75% · a signal 25% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CRT main supply by Thinkpad4by3, Boost Electrical Draft by AnishLanka, Audio mixer by 21bsirota and Jetson Orin Baseboard by AtlasAutoware.
The LM5155DSSR in open source designs
The gallery holds 14 open source boards using the LM5155DSSR from 5 GitHub repositories; a typical one measures about 100 × 90.1 mm and carries around 158 components.
79% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Main supply 4 VM by Thinkpad4by3.
Microcontrollers on boards using the LM5155DSSR
What boards using the LM5155DSSR are built for
LM5155DSSR: common questions
Where can I find a LM5155DSSR reference design?
Each of the 14 boards on this page is a real design using the LM5155DSSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM5155DSSR CS_5 pin?
The CS_5 pin has a series resistor on 4 of 5 designs, most often 909 Ω (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the LM5155DSSR.
What resistor goes on the LM5155DSSR BIAS_1 pin?
The BIAS_1 pin has a series resistor on 3 of 5 designs, most often 500 kΩ (then 110 kΩ). Counted from the KiCad layouts of 5 open source designs using the LM5155DSSR.
How is the LM5155DSSR FB pin connected?
The FB pin has a capacitor to GND on 3 of 5 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the LM5155DSSR.
Which microcontrollers do boards using the LM5155DSSR use?
Most are built on ESP32 (2).
How big is a typical board using the LM5155DSSR?
The median is 100 × 90.1 mm, and 79% are two-layer designs.
What is the most popular open source board using the LM5155DSSR?
By GitHub stars, Main supply 4 VM by Thinkpad4by3, with 5 stars.
Can I simulate one of these boards using the LM5155DSSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.