8 open source boards using the LM7824_TO220
Real designs built with the LM7824_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Drsstc
domergan
64.8 × 76.2 mm69 parts2LNo license0Ud29
profdc9
97.5 × 97.5 mm123 parts2LNo license56Ud29
iduwhux
97.5 × 97.5 mm123 parts2LNo license1Ud27c
profdc9
97.5 × 97.5 mm106 parts2LNo license56Ud27c
iduwhux
97.5 × 97.5 mm106 parts2LNo license1ESP8266
New
rajeev2705
148.5 × 117.3 mm79 parts2LNo license0ESP8266
PCB PANELIZED
rajeev2705
296.5 × 240.8 mm70 parts2LNo license0Pre power
krzys9876
71.8 × 22 mm10 parts2LMIT0
How designs wire the LM7824_TO220
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM7824_TO220 connects to, and the resistors, capacitors and other passives placed on it.
- The VI_1 pin has a capacitor to GND on 5 of 5 designs, most often 100 µF (then 330 nF).
- The VO_3 pin has a decoupling capacitor on 2 of 5 designs, most often 100 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VI_1pin 1 | Connected to: Signal 100% |
|
| GND_2pin 2 | Connected to: GND 100% | — |
| VO_3pin 3 | Connected to: 24V 60% · a signal 40% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ud27c by profdc9, Ud27c by iduwhux, Drsstc by domergan and Pre power by krzys9876.
The LM7824_TO220 in open source designs
The gallery holds 8 open source boards using the LM7824_TO220 from 5 GitHub repositories; a typical one measures about 97.5 × 97.5 mm and carries around 93 components.
100% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is Ud29 by profdc9.
Parts used alongside the LM7824_TO220
Microcontrollers on boards using the LM7824_TO220
What boards using the LM7824_TO220 are built for
LM7824_TO220: common questions
Where can I find a LM7824_TO220 reference design?
Each of the 8 boards on this page is a real design using the LM7824_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM7824_TO220 VI_1 pin connected?
The VI_1 pin has a capacitor to GND on 5 of 5 designs, most often 100 µF (then 330 nF). Counted from the KiCad layouts of 5 open source designs using the LM7824_TO220.
What decoupling capacitors do designs use on the LM7824_TO220 VO_3 pin?
The VO_3 pin has a decoupling capacitor on 2 of 5 designs, most often 100 µF. Counted from the KiCad layouts of 5 open source designs using the LM7824_TO220.
What parts are used alongside the LM7824_TO220?
The 74HC08, 74HC14, 74HC74, LM311 and LM7805_TO220 appear in the most repositories here.
Which microcontrollers do boards using the LM7824_TO220 use?
Most are built on ESP8266 (2).
How big is a typical board using the LM7824_TO220?
The median is 97.5 × 97.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM7824_TO220?
By GitHub stars, Ud29 by profdc9, with 56 stars.
Can I simulate one of these boards using the LM7824_TO220 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.