9 open source boards using the LM4041CILPR
Real designs built with the LM4041CILPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
POV-Globe
Mikail-Sadic-UT
83.6 × 86.6 mm95 parts2LNo license40ESP8266
ECE445L Final Project
DylanMeeks
152.4 × 127 mm241 parts2LNo license0SeniorDesign SwanGanz
ATK-1
193 × 114.3 mm149 parts4LNo license0Nordic nRF
Senior design strength training
brnna05
30 × 70 mm72 parts4LNo license0ESP8266
ECE 445L Baseline Project
mjetpurwala
194.9 × 93 mm61 parts2LNo license0ESP8266
ECE 445L Baseline Project
wtc534
93.5 × 153.7 mm44 parts2LNo license0ESP8266
ECE 445L Baseline Project
Siddhant779
93.5 × 153.7 mm44 parts2LNo license0ESP32
ECE445L Starter
Andres-Wearden
164.3 × 114.8 mm62 parts2LNo license0ESP32
ECE445L Operator Final
Andres-Wearden
128.8 × 114.8 mm56 parts2LNo license0
How designs wire the LM4041CILPR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LM4041CILPR connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a resistor to GND on 7 of 8 designs, most often 10 kΩ (then 1 kΩ).
- Pin 3 is tied to GND on 8 of 8 designs.
- Pin 1 has a pull-up to VREF on 5 of 8 designs, most often 47 kΩ.
- Pin 2 is tied to VREF on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 88% |
|
| Pin 2 | Connected to: VREF 63% · a signal 38% | — |
| Pin 3 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include POV-Globe by Mikail-Sadic-UT, ECE445L Operator Final by Andres-Wearden, SeniorDesign SwanGanz by ATK-1 and Senior design strength training by brnna05.
The LM4041CILPR in open source designs
The gallery holds 9 open source boards using the LM4041CILPR from 8 GitHub repositories; a typical one measures about 128.8 × 114.8 mm and carries around 62 components.
78% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is POV-Globe by Mikail-Sadic-UT.
Parts used alongside the LM4041CILPR
Microcontrollers on boards using the LM4041CILPR
What boards using the LM4041CILPR are built for
LM4041CILPR: common questions
Where can I find a LM4041CILPR reference design?
Each of the 9 boards on this page is a real design using the LM4041CILPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM4041CILPR pin 1?
Pin 1 has a resistor to GND on 7 of 8 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 8 open source designs using the LM4041CILPR.
How is the LM4041CILPR pin 3 connected?
Pin 3 is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the LM4041CILPR.
How is the LM4041CILPR pin 2 connected?
Pin 2 is tied to VREF on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the LM4041CILPR.
What parts are used alongside the LM4041CILPR?
The MCP34119P, Adafruit ST7735R, EK-TM4C123GXL, TLV5616 and ESP8266-1 appear in the most repositories here.
Which microcontrollers do boards using the LM4041CILPR use?
Most are built on ESP8266 (5), ESP32 (2) and Nordic nRF (1).
How big is a typical board using the LM4041CILPR?
The median is 128.8 × 114.8 mm, and 78% are two-layer designs.
What is the most popular open source board using the LM4041CILPR?
By GitHub stars, POV-Globe by Mikail-Sadic-UT, with 40 stars.
Can I simulate one of these boards using the LM4041CILPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.