7 open source boards using the LTC3111EMSEPBF
Real designs built with the LTC3111EMSEPBF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-S3-Platform
WhirlingBits
97.5 × 90.6 mm176 parts4LMIT10ESP32
Espressif ESP32 S3-CP-24 Developer Platform
rompasaurus
97.5 × 90.6 mm176 parts4LNo license2ESP32
ESP32 S3 PCB TEMPLATE
rompasaurus
86.9 × 88.5 mm84 parts2LNo license2ESP32
ESP32 PCB LAYOUT AJEET
rompasaurus
98 × 55.5 mm81 parts4LNo license2ESP32
ESP32-DevKit-Lipo
rompasaurus
27.9 × 48.3 mm47 parts2LNo license2ESP32
Main rounded
rompasaurus
129.5 × 50.8 mm31 parts2LNo license2RP2040/RP2350
RP2040-Guide
rompasaurus
45.2 × 93.4 mm31 parts2LNo license2
The LTC3111EMSEPBF in open source designs
The gallery holds 7 open source boards using the LTC3111EMSEPBF from 2 GitHub repositories; a typical one measures about 97.5 × 88.5 mm and carries around 81 components.
57% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is ESP32-S3-Platform by WhirlingBits.
Parts used alongside the LTC3111EMSEPBF
Microcontrollers on boards using the LTC3111EMSEPBF
What boards using the LTC3111EMSEPBF are built for
LTC3111EMSEPBF: common questions
Where can I find a LTC3111EMSEPBF reference design?
Each of the 7 boards on this page is a real design using the LTC3111EMSEPBF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LTC3111EMSEPBF use?
Most are built on ESP32 (6) and RP2040/RP2350 (1).
How big is a typical board using the LTC3111EMSEPBF?
The median is 97.5 × 88.5 mm, and 57% are two-layer designs.
What is the most popular open source board using the LTC3111EMSEPBF?
By GitHub stars, ESP32-S3-Platform by WhirlingBits, with 10 stars.
Can I simulate one of these boards using the LTC3111EMSEPBF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.