7 open source boards using the LTC4365DDB
Real designs built with the LTC4365DDB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vna mm synth
loxodes
314.5 × 201 mm428 parts6LNo license205PIC
QI Charger
drewsum
150 × 50 mm293 parts2LNo license20ARGOS DEMO
CNES
50 × 80 mm85 parts4LCERN-OHL-S-2.06Sourccey electrical
vulcan-forge
112 × 98 mm144 parts2LCERN-OHL-S-2.02PIC
VFD Clock
drewsum
200 × 50 mm458 parts2LNo license1ESP32
Digital circuits
tyduszkaszok
70.4 × 48.2 mm73 parts2LNo license0Vna mm ref
loxodes
115.5 × 66 mm210 parts4LNo license205
How designs wire the LTC4365DDB
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LTC4365DDB connects to, and the resistors, capacitors and other passives placed on it.
- The OV pin has a resistor to GND on 5 of 6 designs, most often 243 kΩ (then 240 kΩ).
- The OV pin has a series resistor on 5 of 6 designs, most often 86.6 kΩ (then 60 kΩ).
- The UV pin has a series resistor on 5 of 6 designs, most often 86.6 kΩ (then 60 kΩ).
- The UV pin has a pull-up to 12V on 4 of 6 designs, most often 6.04 MΩ (then 5.6 MΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 9 | Connected to: GND 100% | — |
| OVpin 2 | Connected to: Signal 83% · GND 17% |
|
| UVpin 3 | Connected to: Signal 100% |
|
| VINpin 4 | Connected to: 12V 67% · a signal 33% |
|
| GATEpin 5 | Connected to: Signal 100% |
|
| VOUTpin 6 | Connected to: Signal 100% |
|
| FAULTpin 7 | Connected to: Not connected 50% · a signal 50% |
|
| SHDNpin 8 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vna mm ref by loxodes, QI Charger by drewsum, ARGOS DEMO by CNES and Sourccey electrical by vulcan-forge.
The LTC4365DDB in open source designs
The gallery holds 7 open source boards using the LTC4365DDB from 6 GitHub repositories; a typical one measures about 115.5 × 66 mm and carries around 210 components.
57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Vna mm synth by loxodes.
Parts used alongside the LTC4365DDB
What boards using the LTC4365DDB are built for
LTC4365DDB: common questions
Where can I find a LTC4365DDB reference design?
Each of the 7 boards on this page is a real design using the LTC4365DDB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LTC4365DDB OV pin?
The OV pin has a resistor to GND on 5 of 6 designs, most often 243 kΩ (then 240 kΩ). Counted from the KiCad layouts of 6 open source designs using the LTC4365DDB.
What resistor goes on the LTC4365DDB UV pin?
The UV pin has a series resistor on 5 of 6 designs, most often 86.6 kΩ (then 60 kΩ). Counted from the KiCad layouts of 6 open source designs using the LTC4365DDB.
What resistor goes on the LTC4365DDB GATE pin?
The GATE pin has a series resistor on 4 of 6 designs, most often 10 Ω (then 5.1 kΩ). Counted from the KiCad layouts of 6 open source designs using the LTC4365DDB.
What parts are used alongside the LTC4365DDB?
The FT234XD, ISO7321C, TPD3S014DBVR and TPS62130 appear in the most repositories here.
Which microcontrollers do boards using the LTC4365DDB use?
Most are built on PIC (2) and ESP32 (1).
How big is a typical board using the LTC4365DDB?
The median is 115.5 × 66 mm, and 57% are two-layer designs.
What is the most popular open source board using the LTC4365DDB?
By GitHub stars, Vna mm synth by loxodes, with 205 stars.
Can I simulate one of these boards using the LTC4365DDB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.