10 open source boards using the TPD3S014DBVR

Real designs built with the TPD3S014DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TPD3S014DBVR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPD3S014DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 4.7 µF).
  • The EN pin has a capacitor to GND on 6 of 9 designs, most often 100 nF.
  • The OUT pin is tied to 5V on 6 of 9 designs (a signal on 3).
  • The D1 pin has a series resistor on 5 of 9 designs, most often 27 Ω (then 22 Ω).
ENpin 1Connected to: Signal 100%
  • Capacitor to GND on 67% · 100 nF (4)
  • Inductor on 44%
  • Ferrite bead on 33%
GNDpin 2Connected to: GND 100%
INpin 3Connected to: Signal 78% · 5V 22%
  • Capacitor to GND on 78% · 100 nF (4), 4.7 µF (1)
  • Inductor on 44%
  • Ferrite bead on 33%
OUTpin 4Connected to: 5V 67% · a signal 33%
D1pin 5Connected to: A connector 100%, CY7C68013A-56LTXC 33%
  • Series resistor on 56% · 27 Ω (4), 22 Ω (1)
  • Capacitor to GND on 44% · 47 pF (4)
D2pin 6Connected to: A connector 100%, CY7C68013A-56LTXC 33%
  • Series resistor on 56% · 27 Ω (4), 22 Ω (1)
  • Capacitor to GND on 44% · 47 pF (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Base board by GlasgowEmbedded, ECPBreaker by gregdavill, Mainboard by daveshah1 and QI Charger by drewsum.

The TPD3S014DBVR in open source designs

The gallery holds 10 open source boards using the TPD3S014DBVR from 9 GitHub repositories; a typical one measures about 110 × 50 mm and carries around 228 components.

50% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Base board by GlasgowEmbedded.

Microcontrollers on boards using the TPD3S014DBVR

TPD3S014DBVR: common questions

Where can I find a TPD3S014DBVR reference design?

Each of the 10 boards on this page is a real design using the TPD3S014DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPD3S014DBVR IN pin connected?

The IN pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the TPD3S014DBVR.

How is the TPD3S014DBVR EN pin connected?

The EN pin has a capacitor to GND on 6 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the TPD3S014DBVR.

How is the TPD3S014DBVR OUT pin connected?

The OUT pin is tied to 5V on 6 of 9 designs (a signal on 3). Counted from the KiCad layouts of 9 open source designs using the TPD3S014DBVR.

What parts are used alongside the TPD3S014DBVR?

The FT234XD, CY7C68013A-56LTXC, DAC081C081CIMK/NOPB, ISO7321C and TPS73101DBVR appear in the most repositories here.

Which microcontrollers do boards using the TPD3S014DBVR use?

Most are built on FPGA (4), PIC (4) and RP2040/RP2350 (2).

How big is a typical board using the TPD3S014DBVR?

The median is 110 × 50 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPD3S014DBVR?

By GitHub stars, Base board by GlasgowEmbedded, with 2,229 stars.

Can I simulate one of these boards using the TPD3S014DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part