8 open source boards using the M24C02-FMN
Real designs built with the M24C02-FMN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Fmc usb gpio spi jtag
chipsalliance
76.5 × 69 mm136 parts6LApache-2.019STM32
Bonjour-STM32
emoestudio
50 × 70 mm68 parts2LGPL-3.03Usb hub
snakeye
100 × 45 mm39 parts4LMIT1RP2040/RP2350
UniDebug
shreyask21
143 × 164 mm273 parts2LNo license0Virtex-6-ML602-ADCDAC
tcfh2003
100 × 99.7 mm117 parts4LNo license0LPV01 SHIELD
pureHK
140 × 125 mm105 parts4LNo license0Fmc sdram
chipsalliance
76.5 × 69 mm63 parts4LApache-2.019IcE1usb RS422 extension
osmocom
37.5 × 32.5 mm52 parts4LNo license9
How designs wire the M24C02-FMN
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the M24C02-FMN connects to, and the resistors, capacitors and other passives placed on it.
- The E2 pin is tied to GND on 6 of 6 designs.
- The WC pin is tied to GND on 5 of 6 designs.
- The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF).
- The E0 pin is tied to GND on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| E0pin 1 | Connected to: GND 67% · a signal 33% | — |
| E1pin 2 | Connected to: GND 67% · a signal 33% | — |
| E2pin 3 | Connected to: GND 100% | — |
| VSSpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: A connector 33% |
|
| WCpin 7 | Connected to: GND 83% · a signal 17% | — |
| VCCpin 8 | Connected to: 3.3V 67% · a signal 33% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fmc sdram by chipsalliance, IcE1usb RS422 extension by osmocom, Bonjour-STM32 by emoestudio and Usb hub by snakeye.
The M24C02-FMN in open source designs
The gallery holds 8 open source boards using the M24C02-FMN from 7 GitHub repositories; a typical one measures about 88.2 × 69.5 mm and carries around 87 components.
75% use four copper layers or more, and 50% carry an open source license.
The most starred is Fmc usb gpio spi jtag by chipsalliance.
Parts used alongside the M24C02-FMN
Microcontrollers on boards using the M24C02-FMN
What boards using the M24C02-FMN are built for
M24C02-FMN: common questions
Where can I find a M24C02-FMN reference design?
Each of the 8 boards on this page is a real design using the M24C02-FMN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the M24C02-FMN E2 pin connected?
The E2 pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the M24C02-FMN.
How is the M24C02-FMN WC pin connected?
The WC pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the M24C02-FMN.
What decoupling capacitors do designs use on the M24C02-FMN VCC pin?
The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the M24C02-FMN.
Which microcontrollers do boards using the M24C02-FMN use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the M24C02-FMN?
The median is 88.2 × 69.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the M24C02-FMN?
By GitHub stars, Fmc usb gpio spi jtag by chipsalliance, with 19 stars.
Can I simulate one of these boards using the M24C02-FMN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.