6 open source boards using the MAX3078E

Real designs built with the MAX3078E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MAX3078E

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MAX3078E connects to, and the resistors, capacitors and other passives placed on it.

  • The A pin has a series resistor on 3 of 5 designs, most often 120 Ω.
  • The B pin has a series resistor on 3 of 5 designs, most often 120 Ω.
  • The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
  • The DE pin has a resistor to GND on 2 of 5 designs, most often 1 MΩ (then 10 kΩ).
DEpin 3Connected to: The microcontroller 80%
  • Resistor to GND on 40% · 1 MΩ (1), 10 kΩ (1)
GNDpin 5Connected to: GND 100%
Apin 6Connected to: A connector 80% · not connected 20%
  • Series resistor on 60% · 120 Ω (3)
Bpin 7Connected to: A connector 80% · not connected 20%
  • Series resistor on 60% · 120 Ω (3)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (3)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LumenPnP Motherboard by opulo-inc, Interposer by opulo-inc, Base heating by NerdyProjects and GrblHAL CNC by jaytektas.

The MAX3078E in open source designs

The gallery holds 6 open source boards using the MAX3078E from 5 GitHub repositories; a typical one measures about 107 × 92 mm and carries around 178 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is LumenPnP Motherboard by opulo-inc.

Microcontrollers on boards using the MAX3078E

What boards using the MAX3078E are built for

MAX3078E: common questions

Where can I find a MAX3078E reference design?

Each of the 6 boards on this page is a real design using the MAX3078E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MAX3078E A pin?

The A pin has a series resistor on 3 of 5 designs, most often 120 Ω. Counted from the KiCad layouts of 5 open source designs using the MAX3078E.

What resistor goes on the MAX3078E B pin?

The B pin has a series resistor on 3 of 5 designs, most often 120 Ω. Counted from the KiCad layouts of 5 open source designs using the MAX3078E.

What decoupling capacitors do designs use on the MAX3078E VCC pin?

The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MAX3078E.

What parts are used alongside the MAX3078E?

The 74HC2G34, AMS1117-3.3, AP1117-33, LM358 and LMR51430 appear in the most repositories here.

Which microcontrollers do boards using the MAX3078E use?

Most are built on STM32 (5).

How big is a typical board using the MAX3078E?

The median is 107 × 92 mm, and 50% are two-layer designs.

What is the most popular open source board using the MAX3078E?

By GitHub stars, LumenPnP Motherboard by opulo-inc, with 3,655 stars.

Can I simulate one of these boards using the MAX3078E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part