8 open source boards using the MAX491E

Real designs built with the MAX491E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The MAX491E in open source designs

The gallery holds 8 open source boards using the MAX491E from 2 GitHub repositories; a typical one measures about 80 × 60 mm and carries around 34 components.

88% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Bkm-10rlternative by skumlos.

Microcontrollers on boards using the MAX491E

What boards using the MAX491E are built for

MAX491E: common questions

Where can I find a MAX491E reference design?

Each of the 8 boards on this page is a real design using the MAX491E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MAX491E use?

Most are built on WCH CH32/CH55x (7) and AVR/Arduino (1).

How big is a typical board using the MAX491E?

The median is 80 × 60 mm, and 88% are two-layer designs.

What is the most popular open source board using the MAX491E?

By GitHub stars, Bkm-10rlternative by skumlos, with 15 stars.

Can I simulate one of these boards using the MAX491E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part