5 open source boards using the MC6847

Real designs built with the MC6847, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the MC6847

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MC6847 connects to, and the resistors, capacitors and other passives placed on it.

  • The RP pin is left unconnected on 5 of 5 designs.
  • The DA5 pin is left unconnected on 3 of 5 designs (a signal on 2).
  • The DA6 pin is left unconnected on 3 of 5 designs (a signal on 2).
  • The DA7 pin is left unconnected on 3 of 5 designs (a signal on 2).
GNDpin 1Connected to: GND 100%
CHBpin 9Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 40% · 10 nF (1), 10 µF (1)
DA5pin 13Connected to: Not connected 60% · a signal 40%
DA6pin 14Connected to: Not connected 60% · a signal 40%
DA7pin 15Connected to: Not connected 60% · a signal 40%
DA8pin 16Connected to: Not connected 60% · a signal 40%
VCCpin 17Connected to: 5V 100%
DA9pin 18Connected to: Not connected 60% · a signal 40%
DA10pin 19Connected to: Not connected 60% · a signal 40%
DA11pin 20Connected to: Not connected 60% · a signal 40%
DA12pin 21Connected to: Not connected 60% · a signal 40%
DA1pin 23Connected to: Not connected 60% · a signal 40%
DA2pin 24Connected to: Not connected 60% · a signal 40%
DA3pin 25Connected to: Not connected 60% · a signal 40%
DA4pin 26Connected to: Not connected 60% · a signal 40%
RPpin 36Connected to: Not connected 100%

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RC6502 VDU by tebl, Dragon32Issue2 by jimbro1000, K68-VDG by kuninet and Dragon32Issue2aSecam by jimbro1000.

The MC6847 in open source designs

The gallery holds 5 open source boards using the MC6847 from 5 GitHub repositories; a typical one measures about 120 × 99.7 mm and carries around 64 components.

80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is RC6502 VDU by tebl.

What boards using the MC6847 are built for

MC6847: common questions

Where can I find a MC6847 reference design?

Each of the 5 boards on this page is a real design using the MC6847. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MC6847 RP pin connected?

The RP pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MC6847.

How is the MC6847 DA5 pin connected?

The DA5 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the MC6847.

How is the MC6847 DA6 pin connected?

The DA6 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the MC6847.

What parts are used alongside the MC6847?

The MC14053, 68A364, 74ALS74N, 74LS00N and 74LS02N appear in the most repositories here.

How big is a typical board using the MC6847?

The median is 120 × 99.7 mm, and 80% are two-layer designs.

What is the most popular open source board using the MC6847?

By GitHub stars, RC6502 VDU by tebl, with 192 stars.

Can I simulate one of these boards using the MC6847 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part