11 open source boards using the MCP1702T-3302E/CB
Real designs built with the MCP1702T-3302E/CB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Nixie tube clock
mbelanger0
157.5 × 72 mm133 parts2LNo license0RP2040/RP2350
BNN
sparshgup
60.8 × 52.7 mm68 parts2LNo license0FPGA
ICE40UP5Kdev
redhotchili0909
32.2 × 52.2 mm51 parts2LMIT0ESP32
Esp32-IoT
F45c
51.8 × 49 mm47 parts2LNo license0ESP32
Portable gnss display
F45c
40.8 × 63.4 mm41 parts2LNo license0Eclectronics fall-2026
flipper-slipper
18 × 22 mm15 parts2LNo license0Eclectronics mp1
Dh-Van
16.1 × 14 mm14 parts2LNo license0PIC
Smu base
bminch
68.6 × 53.3 mm92 parts4LNo license2RP2040/RP2350
RP2350Adev
sparshgup
35.1 × 52.4 mm43 parts2LNo license0MP1
redhotchili0909
20.5 × 17 mm16 parts2LMIT0STM32
PDNode-PDCard-4242
DvidMakesThings
57.2 × 29.9 mm74 parts6LAGPL-3.086
How designs wire the MCP1702T-3302E/CB
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MCP1702T-3302E/CB connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a decoupling capacitor on 7 of 9 designs, most often 10 µF (then 100 nF).
- The VIN pin has a decoupling capacitor on 6 of 9 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 75% · a signal 17% | — |
| VOUTpin 2 | Connected to: 3.3V 67% · a signal 33% |
|
| VINpin 3 | Connected to: 5V 56% · a signal 44% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PDNode-PDCard-4242 by DvidMakesThings, Smu base by bminch, Eclectronics mp1 by Dh-Van and Esp32-IoT by F45c.
The MCP1702T-3302E/CB in open source designs
The gallery holds 11 open source boards using the MCP1702T-3302E/CB from 9 GitHub repositories; a typical one measures about 40.8 × 52.2 mm and carries around 47 components.
82% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is PDNode-PDCard-4242 by DvidMakesThings.
Parts used alongside the MCP1702T-3302E/CB
Microcontrollers on boards using the MCP1702T-3302E/CB
What boards using the MCP1702T-3302E/CB are built for
MCP1702T-3302E/CB: common questions
Where can I find a MCP1702T-3302E/CB reference design?
Each of the 11 boards on this page is a real design using the MCP1702T-3302E/CB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1702T-3302E/CB VOUT pin?
The VOUT pin has a decoupling capacitor on 7 of 9 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the MCP1702T-3302E/CB.
What decoupling capacitors do designs use on the MCP1702T-3302E/CB VIN pin?
The VIN pin has a decoupling capacitor on 6 of 9 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the MCP1702T-3302E/CB.
What parts are used alongside the MCP1702T-3302E/CB?
The MCP6021T-E/OT, SC1509-A4 and W25Q32JV appear in the most repositories here.
Which microcontrollers do boards using the MCP1702T-3302E/CB use?
Most are built on RP2040/RP2350 (3), ESP32 (2), FPGA (1) and PIC (1).
How big is a typical board using the MCP1702T-3302E/CB?
The median is 40.8 × 52.2 mm, and 82% are two-layer designs.
What is the most popular open source board using the MCP1702T-3302E/CB?
By GitHub stars, PDNode-PDCard-4242 by DvidMakesThings, with 86 stars.
Can I simulate one of these boards using the MCP1702T-3302E/CB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.