14 open source boards using the W25Q32JV
Real designs built with the W25Q32JV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Glider
Modos-Labs
90 × 80 mm356 parts4LCERN-OHL-S-2.02.7kFPGA
Fmcw
matthuszagh
118.6 × 83.2 mm432 parts4LApache-2.066RP2040/RP2350
RKD-OLD
PTALTS-LK
100 × 94 mm86 parts2LGPL-3.041RP2040/RP2350
Solarpump
rivimey
100 × 160 mm424 parts4LNo license1RP2040/RP2350
Panelized-4layer
openconcepts-ar
114.6 × 70.2 mm209 parts4LCustom license1STM32
Glider
pdyxs
90 × 80 mm356 parts4LCERN-OHL-S-2.00RP2040/RP2350
Nixie tube clock
mbelanger0
157.5 × 72 mm133 parts2LNo license0RP2040/RP2350
BNN
sparshgup
60.8 × 52.7 mm68 parts2LNo license0FPGA
ICE40UP5Kdev
mbelanger0
25.4 × 52.4 mm51 parts2LNo license0FPGA
Fmcw nightly
matthuszagh
94.6 × 83.4 mm424 parts4LApache-2.066RP2040/RP2350
Pcb
openconcepts-ar
69.6 × 29.4 mm154 parts4LCustom license1RP2040/RP2350
RP2350Adev
sparshgup
35.1 × 52.4 mm43 parts2LNo license0Mp1
sparshgup
19.5 × 14.8 mm16 parts2LNo license0FPGA
VoxLink - Lattice Core Module
MichalVarsanyi
13 × 13 mm52 parts6LMIT1
How designs wire the W25Q32JV
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the W25Q32JV connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 80% |
|
| IO2pin 3 | Connected to: The microcontroller 60% |
|
| GNDpin 4 | Connected to: GND 90% | — |
| VCCpin 8 | Connected to: 3.3V 89% |
|
| EPpin 9 | Connected to: GND 100% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Glider by Modos-Labs, Fmcw by matthuszagh, RKD-OLD by PTALTS-LK and VoxLink - Lattice Core Module by MichalVarsanyi.
The W25Q32JV in open source designs
The gallery holds 14 open source boards using the W25Q32JV from 10 GitHub repositories; a typical one measures about 90 × 71.1 mm and carries around 144 components.
57% use four copper layers or more, and 43% carry an open source license.
The most starred is Glider by Modos-Labs.
Parts used alongside the W25Q32JV
Microcontrollers on boards using the W25Q32JV
What boards using the W25Q32JV are built for
W25Q32JV: common questions
Where can I find a W25Q32JV reference design?
Each of the 14 boards on this page is a real design using the W25Q32JV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q32JV VCC pin?
The VCC pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the W25Q32JV.
What parts are used alongside the W25Q32JV?
The MT41K64M16TW, MT9700, RP2040, USBLC6-2P6 and ADV7611 appear in the most repositories here.
Which microcontrollers do boards using the W25Q32JV use?
Most are built on RP2040/RP2350 (7), FPGA (4) and STM32 (2).
How big is a typical board using the W25Q32JV?
The median is 90 × 71.1 mm, and 43% are two-layer designs.
What is the most popular open source board using the W25Q32JV?
By GitHub stars, Glider by Modos-Labs, with 2,676 stars.
Can I simulate one of these boards using the W25Q32JV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.