9 open source boards using the MCP3204

Real designs built with the MCP3204, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the MCP3204

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP3204 connects to, and the resistors, capacitors and other passives placed on it.

  • The VREF pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF).
  • The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF).
  • The CH0 pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 300 Ω).
  • The CH1 pin has a series resistor on 4 of 7 designs, most often 1 kΩ (then 300 Ω).
CH0pin 1Connected to: Signal 100%
  • Series resistor on 57% · 10 kΩ (2), 300 Ω (1), 1 kΩ (1)
  • Capacitor to GND on 43% · 100 nF (1), 1 µF (1), 3 nF (1)
CH1pin 2Connected to: Signal 86%
  • Series resistor on 57% · 1 kΩ (2), 300 Ω (1), 330 Ω (1)
CH2pin 3Connected to: Signal 86%
  • Pull-up to 3.3V on 43% · 10 kΩ (1)
CH3pin 4Connected to: Signal 71% · not connected 29%
  • Series resistor on 57% · 300 Ω (1), 100 Ω (1), 1 kΩ (1)
NCpin 5, 6Connected to: Not connected 100%
DGNDpin 7Connected to: GND 100%
CS/SHDNpin 8Connected to: A connector 43%, the microcontroller 29%
  • Pull-up to 3.3V on 43% · 10 kΩ (2), 100 kΩ (1)
AGNDpin 12Connected to: GND 100%
VREFpin 13Connected to: 3.3V 86%
  • Decoupling capacitor on 71% · 100 nF (6), 4.7 µF (3), 10 µF (1)
VDDpin 14Connected to: 3.3V 100%
  • Decoupling capacitor on 71% · 100 nF (9), 4.7 µF (3)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DonCon2040 by ravinrabbid, Wifi PB by AntonioMR, Dc electronic load by joeferner and Gatebench by alheir.

The MCP3204 in open source designs

The gallery holds 9 open source boards using the MCP3204 from 7 GitHub repositories; a typical one measures about 100 × 58.4 mm and carries around 107 components.

67% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is DonCon2040 by ravinrabbid.

Microcontrollers on boards using the MCP3204

MCP3204: common questions

Where can I find a MCP3204 reference design?

Each of the 9 boards on this page is a real design using the MCP3204. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP3204 VREF pin?

The VREF pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the MCP3204.

What decoupling capacitors do designs use on the MCP3204 VDD pin?

The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the MCP3204.

What resistor goes on the MCP3204 CH0 pin?

The CH0 pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 300 Ω). Counted from the KiCad layouts of 7 open source designs using the MCP3204.

Which microcontrollers do boards using the MCP3204 use?

Most are built on ESP8266 (2), RP2040/RP2350 (2) and STM32 (1).

How big is a typical board using the MCP3204?

The median is 100 × 58.4 mm, and 67% are two-layer designs.

What is the most popular open source board using the MCP3204?

By GitHub stars, DonCon2040 by ravinrabbid, with 64 stars.

Can I simulate one of these boards using the MCP3204 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part