3 open source boards using the MT6701CT-STD
Real designs built with the MT6701CT-STD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Cyberwatch
ttankbuster
37.5 × 45.5 mm32 parts2LMIT1STM32
Spinner
enkhbold470
84 × 66 mm83 parts4LCERN-OHL-S-2.00STM32
Spinner
enkhbold470
84 × 66 mm83 parts4LCERN-OHL-S-2.00
The MT6701CT-STD in open source designs
The gallery holds 3 open source boards using the MT6701CT-STD from 3 GitHub repositories; a typical one measures about 84 × 66 mm and carries around 83 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Cyberwatch by ttankbuster.
Parts used alongside the MT6701CT-STD
What boards using the MT6701CT-STD are built for
MT6701CT-STD: common questions
Where can I find a MT6701CT-STD reference design?
Each of the 3 boards on this page is a real design using the MT6701CT-STD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MT6701CT-STD?
The AP63203WU-7, IR2104STRPBF, L78L12ABUTR, STM32G431KBT6 and TCAN332GDR appear in the most repositories here.
Which microcontrollers do boards using the MT6701CT-STD use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the MT6701CT-STD?
The median is 84 × 66 mm, and 33% are two-layer designs.
What is the most popular open source board using the MT6701CT-STD?
By GitHub stars, Cyberwatch by ttankbuster, with 1 stars.
Can I simulate one of these boards using the MT6701CT-STD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.