4 open source boards using the MYMGK00504ERSR
Real designs built with the MYMGK00504ERSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Linecard
azonenberg
185 × 93 mm611 parts6LBSD-3-Clause35
STM32Kup lulz
154.5 × 137 mm376 parts4LBSD-3-Clause17
STM32Mainboard
165 × 121 mm617 parts10LBSD-3-Clause7
STM32Switch engine
151 × 111 mm362 parts10LBSD-3-Clause35
The MYMGK00504ERSR in open source designs
The gallery holds 4 open source boards using the MYMGK00504ERSR from 3 GitHub repositories; a typical one measures about 159.8 × 116 mm and carries around 494 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Linecard by azonenberg.
Parts used alongside the MYMGK00504ERSR
Microcontrollers on boards using the MYMGK00504ERSR
What boards using the MYMGK00504ERSR are built for
MYMGK00504ERSR: common questions
Where can I find a MYMGK00504ERSR reference design?
Each of the 4 boards on this page is a real design using the MYMGK00504ERSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MYMGK00504ERSR?
The 74LVC1T45, AT24MAC402, ECS-1612MV-250-CN, MYMGK1R812ERSR and SIT9121AI-2BF-XXS156.250000G appear in the most repositories here.
Which microcontrollers do boards using the MYMGK00504ERSR use?
Most are built on STM32 (4).
How big is a typical board using the MYMGK00504ERSR?
The median is 159.8 × 116 mm, and 0% are two-layer designs.
What is the most popular open source board using the MYMGK00504ERSR?
By GitHub stars, Linecard by azonenberg, with 35 stars.
Can I simulate one of these boards using the MYMGK00504ERSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.