6 open source boards using the STM32H735-UFBGA176-25
Real designs built with the STM32H735-UFBGA176-25, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Kup lulz
azonenberg
154.5 × 137 mm376 parts4LBSD-3-Clause17
STM32Mainboard
165 × 121 mm617 parts10LBSD-3-Clause7- schematic only · 80 partsSTM32
Grover
80 partsBSD-3-Clause2 
STM32Switch engine
151 × 111 mm362 parts10LBSD-3-Clause35
STM32Fpga stm32-ifaces
90 × 94.5 mm267 parts6LBSD-3-Clause17
STM32Lcbringup
93 × 69 mm198 parts4LBSD-3-Clause35
The STM32H735-UFBGA176-25 in open source designs
The gallery holds 6 open source boards using the STM32H735-UFBGA176-25 from 4 GitHub repositories; a typical one measures about 151 × 111 mm and carries around 315 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Switch engine by azonenberg.
Parts used alongside the STM32H735-UFBGA176-25
Microcontrollers on boards using the STM32H735-UFBGA176-25
What boards using the STM32H735-UFBGA176-25 are built for
STM32H735-UFBGA176-25: common questions
Where can I find a STM32H735-UFBGA176-25 reference design?
Each of the 6 boards on this page is a real design using the STM32H735-UFBGA176-25. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the STM32H735-UFBGA176-25?
The AT24MAC402, ECS-1612MV-250-CN, 74LVC1T45, ADM3101E_QFN and KSZ9031RN appear in the most repositories here.
Which microcontrollers do boards using the STM32H735-UFBGA176-25 use?
Most are built on STM32 (6).
How big is a typical board using the STM32H735-UFBGA176-25?
The median is 151 × 111 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32H735-UFBGA176-25?
By GitHub stars, Switch engine by azonenberg, with 35 stars.
Can I simulate one of these boards using the STM32H735-UFBGA176-25 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.