2 open source boards using the MYMGK00506ERSR
Real designs built with the MYMGK00506ERSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Kup lulz
azonenberg
154.5 × 137 mm376 parts4LBSD-3-Clause17
STM32Switch engine
151 × 111 mm362 parts10LBSD-3-Clause35
The MYMGK00506ERSR in open source designs
The gallery holds 2 open source boards using the MYMGK00506ERSR from 2 GitHub repositories; a typical one measures about 152.8 × 124 mm and carries around 369 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Switch engine by azonenberg.
Parts used alongside the MYMGK00506ERSR
Microcontrollers on boards using the MYMGK00506ERSR
What boards using the MYMGK00506ERSR are built for
MYMGK00506ERSR: common questions
Where can I find a MYMGK00506ERSR reference design?
Each of the 2 boards on this page is a real design using the MYMGK00506ERSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MYMGK00506ERSR?
The 74LVC1T45, ADP1740ACPZ-1.8-R7, AT24MAC402, ECS-1612MV-250-CN and MT25QU256ABA8E12-0AUT appear in the most repositories here.
Which microcontrollers do boards using the MYMGK00506ERSR use?
Most are built on STM32 (2).
How big is a typical board using the MYMGK00506ERSR?
The median is 152.8 × 124 mm, and 0% are two-layer designs.
What is the most popular open source board using the MYMGK00506ERSR?
By GitHub stars, Switch engine by azonenberg, with 35 stars.
Can I simulate one of these boards using the MYMGK00506ERSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.