15 open source boards using the OPA333AIDBVR

Real designs built with the OPA333AIDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the OPA333AIDBVR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the OPA333AIDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The V- pin is tied to GND on 5 of 5 designs.
  • The VOUT pin has a series resistor on 4 of 5 designs, most often 1 kΩ (then 1 MΩ).
  • The - pin has a series resistor on 4 of 5 designs, most often 20 kΩ (then 1 MΩ).
  • The VOUT pin has a series capacitor on 3 of 5 designs, most often 1 µF (then 22 pF).
VOUTpin 1Connected to: Signal 100%
  • Series resistor on 80% · 1 kΩ (4), 1 MΩ (1)
  • Series capacitor on 60% · 1 µF (2), 22 pF (1)
V-pin 2Connected to: GND 100%
+pin 3Connected to: Signal 80% · VREF_RED 20%
  • Series resistor on 60% · 0 Ω (1), 1 kΩ (1), 10 kΩ (1)
  • Capacitor to GND on 60% · 1 µF (2), 10 µF (1)
-pin 4Connected to: Signal 100%
  • Series resistor on 80% · 20 kΩ (2), 1 MΩ (1), 93.1 kΩ (1)
  • Series capacitor on 60% · 1 µF (2), 22 pF (1)
V+pin 5Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (8), 1 µF (1), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zs1100a by zscircuits, ADC Board by esl-epfl, Bpw34 receiver by nguyenhuy0426 and AD8237DevBoard by oihdesigns.

The OPA333AIDBVR in open source designs

The gallery holds 15 open source boards using the OPA333AIDBVR from 6 GitHub repositories; a typical one measures about 70 × 53.3 mm and carries around 63 components.

71% use four copper layers or more, and 20% carry an open source license.

The most starred is Zs1100a by zscircuits.

Microcontrollers on boards using the OPA333AIDBVR

What boards using the OPA333AIDBVR are built for

OPA333AIDBVR: common questions

Where can I find a OPA333AIDBVR reference design?

Each of the 15 boards on this page is a real design using the OPA333AIDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the OPA333AIDBVR V- pin connected?

The V- pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the OPA333AIDBVR.

What resistor goes on the OPA333AIDBVR VOUT pin?

The VOUT pin has a series resistor on 4 of 5 designs, most often 1 kΩ (then 1 MΩ). Counted from the KiCad layouts of 5 open source designs using the OPA333AIDBVR.

What resistor goes on the OPA333AIDBVR - pin?

The - pin has a series resistor on 4 of 5 designs, most often 20 kΩ (then 1 MΩ). Counted from the KiCad layouts of 5 open source designs using the OPA333AIDBVR.

Which microcontrollers do boards using the OPA333AIDBVR use?

Most are built on AVR/Arduino (2).

How big is a typical board using the OPA333AIDBVR?

The median is 70 × 53.3 mm, and 29% are two-layer designs.

What is the most popular open source board using the OPA333AIDBVR?

By GitHub stars, Zs1100a by zscircuits, with 76 stars.

Can I simulate one of these boards using the OPA333AIDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part