6 open source boards using the PAM8302A

Real designs built with the PAM8302A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the PAM8302A

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PAM8302A connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 10 µF (then 1 µF).
  • The SD pin has a pull-up to VBAT on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
  • The NC_2 pin is left unconnected on 6 of 6 designs.
  • The VO+ pin has a ferrite bead on 5 of 6 designs.
SDpin 1Connected to: Signal 100%
  • Pull-up to VBAT on 83% · 10 kΩ (4), 4.7 kΩ (1)
NC_2pin 2Connected to: Not connected 100%
IN+pin 3Connected to: Signal 100%
  • Series resistor on 50% · 100 Ω (3)
  • Series capacitor on 33% · 1 µF (1), 4.7 µF (1)
IN-pin 4Connected to: Signal 83% · GND 17%
  • Series resistor on 50% · 100 Ω (3)
VO+pin 5Connected to: Signal 100%
  • Ferrite bead on 83%
VDDpin 6Connected to: VBAT 83% · a signal 17%
  • Decoupling capacitor on 100% · 10 µF (6), 1 µF (2), 47 µF (1)
GNDpin 7Connected to: GND 100%
VO-pin 8Connected to: Signal 100%
  • Ferrite bead on 83%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gamegirl by davidperrenoud, GameTiger by codetiger, Gametiger console by Cesarbautista10 and Sinthinator by phenax.

The PAM8302A in open source designs

The gallery holds 6 open source boards using the PAM8302A from 6 GitHub repositories; a typical one measures about 81.3 × 99.8 mm and carries around 70 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Gamegirl by davidperrenoud.

Microcontrollers on boards using the PAM8302A

PAM8302A: common questions

Where can I find a PAM8302A reference design?

Each of the 6 boards on this page is a real design using the PAM8302A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the PAM8302A VDD pin?

The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the PAM8302A.

What pull-up resistor is used on the PAM8302A SD pin?

The SD pin has a pull-up to VBAT on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the PAM8302A.

How is the PAM8302A NC_2 pin connected?

The NC_2 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the PAM8302A.

What parts are used alongside the PAM8302A?

The A, AP2112K-3.3, MCP73831-2-OT, RP2040 and W25Q64JVSSIQ appear in the most repositories here.

Which microcontrollers do boards using the PAM8302A use?

Most are built on RP2040/RP2350 (4) and STM32 (1).

How big is a typical board using the PAM8302A?

The median is 81.3 × 99.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the PAM8302A?

By GitHub stars, Gamegirl by davidperrenoud, with 109 stars.

Can I simulate one of these boards using the PAM8302A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part