5 open source boards using the PCA9635
Real designs built with the PCA9635, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
DingoPDM
corygrant
72.4 × 95.3 mm151 parts4LMIT128Raspberry Pi
Expansion board
reubenstr
100 × 49.8 mm75 parts4LMIT51RP2040/RP2350
Midi controller
Tommie1236
100 × 100 mm515 parts4LCERN-OHL-W-2.02Raspberry Pi
Main pcb 2025
matthieuvigne
56 × 65.6 mm69 parts4LGPL-3.05RP2040/RP2350
Faders
Tommie1236
160 × 130 mm348 parts2LCERN-OHL-W-2.02
The PCA9635 in open source designs
The gallery holds 5 open source boards using the PCA9635 from 4 GitHub repositories; a typical one measures about 100 × 95.3 mm and carries around 151 components.
80% use four copper layers or more, and 100% carry an open source license.
The most starred is DingoPDM by corygrant.
Microcontrollers on boards using the PCA9635
What boards using the PCA9635 are built for
PCA9635: common questions
Where can I find a PCA9635 reference design?
Each of the 5 boards on this page is a real design using the PCA9635. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PCA9635 use?
Most are built on Raspberry Pi (2), RP2040/RP2350 (2) and STM32 (1).
How big is a typical board using the PCA9635?
The median is 100 × 95.3 mm, and 20% are two-layer designs.
What is the most popular open source board using the PCA9635?
By GitHub stars, DingoPDM by corygrant, with 128 stars.
Can I simulate one of these boards using the PCA9635 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.