6 open source boards using the SN74HC595
Real designs built with the SN74HC595, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Badge
joshbressers
76.2 × 113 mm99 parts2LApache-2.010RP2040/RP2350
EIT-Machine
Alberta2514640
200 × 130 mm356 parts4LNo license1AVR/Arduino
Segment Display Board
FRC-1721
58.4 × 141 mm90 parts2LNo license1ASU-Honors-Thesis
SeverinDavis
160 × 190 mm77 parts2LNo license0Vikropad
sadekbaroudi
94 × 94.5 mm59 parts2LCERN-OHL-P-2.0220Vik playground
sadekbaroudi
99 × 65.5 mm40 parts2LCERN-OHL-P-2.0220
How designs wire the SN74HC595
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74HC595 connects to, and the resistors, capacitors and other passives placed on it.
- The SRCLR pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
- The OE pin is tied to GND on 3 of 5 designs (a signal on 2).
- The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| SRCLRpin 10 | Connected to: 3.3V 60% · a signal 40% | — |
| OEpin 13 | Connected to: GND 60% · a signal 40% | — |
| VCCpin 16 | Connected to: 3.3V 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vik playground by sadekbaroudi, Badge by joshbressers, EIT-Machine by Alberta2514640 and Segment Display Board by FRC-1721.
The SN74HC595 in open source designs
The gallery holds 6 open source boards using the SN74HC595 from 5 GitHub repositories; a typical one measures about 96.5 × 121.5 mm and carries around 84 components.
83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Vikropad by sadekbaroudi.
Microcontrollers on boards using the SN74HC595
What boards using the SN74HC595 are built for
SN74HC595: common questions
Where can I find a SN74HC595 reference design?
Each of the 6 boards on this page is a real design using the SN74HC595. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74HC595 SRCLR pin connected?
The SRCLR pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the SN74HC595.
How is the SN74HC595 OE pin connected?
The OE pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the SN74HC595.
What decoupling capacitors do designs use on the SN74HC595 VCC pin?
The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SN74HC595.
Which microcontrollers do boards using the SN74HC595 use?
Most are built on AVR/Arduino (2) and RP2040/RP2350 (1).
How big is a typical board using the SN74HC595?
The median is 96.5 × 121.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the SN74HC595?
By GitHub stars, Vikropad by sadekbaroudi, with 220 stars.
Can I simulate one of these boards using the SN74HC595 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.