9 open source boards using the SN74LV1T34DCKR
Real designs built with the SN74LV1T34DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Bonsai C4
customMK
17.8 × 51.6 mm48 parts4LCERN-OHL-P-2.071ESP32
Parsnip
LimesKey
60 × 130 mm400 parts4LCC-BY-NC-4.04Compact tablet
CopperPilot
28 × 125 mm385 parts8LCERN-OHL-S-2.00ESP32
Waypoint
M-Mrk
140 × 80 mm129 parts4LNo license0STM32
ACwing FC A
ACwing-UAV
40.8 × 40.8 mm98 parts4LNo license0Ovc2 stereo
osrf
145 × 43.4 mm243 parts6LApache-2.0207Gliss led
BelaPlatform
17.6 × 83.6 mm56 parts2LNo license18Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00ESP8266
ESP8266-LED-Controller-Board
hampussandberg
70 × 38 mm57 parts2LNo license0
How designs wire the SN74LV1T34DCKR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SN74LV1T34DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_5 pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
- The NC_1 pin is left unconnected on 8 of 9 designs.
- The Y_4 pin has a series resistor on 4 of 9 designs, most often 33 Ω (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NC_1pin 1 | Connected to: Not connected 89% | — |
| GND_3pin 3 | Connected to: GND 100% | — |
| Y_4pin 4 | Connected to: Signal 100% |
|
| VCC_5pin 5 | Connected to: 5V 89% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc2 stereo by osrf, Bonsai C4 by customMK, Gliss led by BelaPlatform and Parsnip by LimesKey.
The SN74LV1T34DCKR in open source designs
The gallery holds 9 open source boards using the SN74LV1T34DCKR from 9 GitHub repositories; a typical one measures about 60 × 80 mm and carries around 129 components.
78% use four copper layers or more, and 44% carry an open source license.
The most starred is Ovc2 stereo by osrf.
Parts used alongside the SN74LV1T34DCKR
What boards using the SN74LV1T34DCKR are built for
SN74LV1T34DCKR: common questions
Where can I find a SN74LV1T34DCKR reference design?
Each of the 9 boards on this page is a real design using the SN74LV1T34DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LV1T34DCKR VCC_5 pin?
The VCC_5 pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the SN74LV1T34DCKR.
How is the SN74LV1T34DCKR NC_1 pin connected?
The NC_1 pin is left unconnected on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the SN74LV1T34DCKR.
What resistor goes on the SN74LV1T34DCKR Y_4 pin?
The Y_4 pin has a series resistor on 4 of 9 designs, most often 33 Ω (then 1 kΩ). Counted from the KiCad layouts of 9 open source designs using the SN74LV1T34DCKR.
What parts are used alongside the SN74LV1T34DCKR?
The IIS2MDCTR, TPS7A2033PDBVR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the SN74LV1T34DCKR use?
Most are built on ESP32 (2), STM32 (2) and ESP8266 (1).
How big is a typical board using the SN74LV1T34DCKR?
The median is 60 × 80 mm, and 22% are two-layer designs.
What is the most popular open source board using the SN74LV1T34DCKR?
By GitHub stars, Ovc2 stereo by osrf, with 207 stars.
Can I simulate one of these boards using the SN74LV1T34DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.