3 open source boards using the SSD1331_DISPLAY
Real designs built with the SSD1331_DISPLAY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Current logger
hnz1102
50 × 70 mm64 parts2LNo license18
ESP32Electricload
185 × 98 mm71 parts2LNo license5
ESP32Dcpower
58 × 90 mm101 parts2LNo license1
The SSD1331_DISPLAY in open source designs
The gallery holds 3 open source boards using the SSD1331_DISPLAY from 3 GitHub repositories; a typical one measures about 58 × 90 mm and carries around 71 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Current logger by hnz1102.
Parts used alongside the SSD1331_DISPLAY
Microcontrollers on boards using the SSD1331_DISPLAY
What boards using the SSD1331_DISPLAY are built for
SSD1331_DISPLAY: common questions
Where can I find a SSD1331_DISPLAY reference design?
Each of the 3 boards on this page is a real design using the SSD1331_DISPLAY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SSD1331_DISPLAY?
The INA228, ESP32-S3-WROOM-1-N16R8, LM35-NEB, OPA187IDBVR and SPX3819M5-L appear in the most repositories here.
Which microcontrollers do boards using the SSD1331_DISPLAY use?
Most are built on ESP32 (3).
How big is a typical board using the SSD1331_DISPLAY?
The median is 58 × 90 mm, and 100% are two-layer designs.
What is the most popular open source board using the SSD1331_DISPLAY?
By GitHub stars, Current logger by hnz1102, with 18 stars.
Can I simulate one of these boards using the SSD1331_DISPLAY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.