27 open source boards using the SSI2164
Real designs built with the SSI2164, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
TiNRS - DuckTape
ThisIsNotRocketScience
60.3 × 106.5 mm255 parts2LMIT87Eurorack 4XVCA Module
Len42
50.5 × 108.2 mm108 parts2LNo license50DualTimbre
StudioKAT
82 × 100 mm132 parts2LNo license7MSM Stereo LPF filter board
JordanAceto
167.6 × 101.6 mm173 parts2LNo license3- schematic only · 794 parts
Quad bass lead drum generator
JordanAceto
794 parts2LNo license3 Mixer hp lp channel
samjkent
50.5 × 128 mm123 parts2LNo license2Josh Ox Ribbon Synth Main VCO board
JordanAceto
170.2 × 213.4 mm349 parts2LCC-BY-4.01AI-TD
jake-is-ESD-protected
63.5 × 83.8 mm84 parts4LNo license1Analog via
starlingcode
213.5 × 128.5 mm269 parts4LCC-BY-NC-4.00Vca
eblade
99.1 × 99.1 mm104 parts2LNo license0Ripples
blthree
70.1 × 99.1 mm103 parts2LNo license0RP2040/RP2350
Space
ThisIsNotRocketScience
119.4 × 110.4 mm249 parts4LMIT87MSM Stereo VCF compressor and distortion board
JordanAceto
52.1 × 185.4 mm113 parts2LNo license3Josh Ox Ribbon Synth VCF/VCA/BBD board
JordanAceto
132.1 × 213.4 mm349 parts2LCC-BY-4.01Working checkpoint 12hp
blthree
81.3 × 99.1 mm103 parts2LNo license0RP2040/RP2350
TiNRS - Tuesday
ThisIsNotRocketScience
60.3 × 106.5 mm194 parts2LMIT87STM32
MSS Stereo LPF PS and LFO board
JordanAceto
170.2 × 76.2 mm79 parts2LNo license3STM32
Josh Ox Ribbon Synth Ribbon board
JordanAceto
193 × 69.9 mm151 parts4LCC-BY-4.01Working checkpoint1
blthree
81.3 × 99.1 mm103 parts2LNo license0MusicBrain VCA8 - 8x VCA slot card
MarkWestbroek
80 × 45 mm85 parts2LMIT0RP2040/RP2350
TiNRS - Wobbler SMDLeds
ThisIsNotRocketScience
60.3 × 106.5 mm192 parts2LMIT87MSM Stereo LPF envelope follower board
JordanAceto
30.5 × 190.5 mm51 parts2LNo license3RP2040/RP2350
TINRS - Wobbler (pico)sch
ThisIsNotRocketScience
60.3 × 106.5 mm180 parts2LMIT87Josh Ox Ribbon Synth Sample and Hold Board
JordanAceto
40.6 × 203.2 mm69 parts2LCC-BY-4.01RP2040/RP2350
WhiteRabbit
ThisIsNotRocketScience
40 × 100 mm146 parts2LMIT87SSI2164 LPF plug in board
JordanAceto
58.4 × 50.8 mm70 partsCC-BY-4.011ESP32
Gamenight
ThisIsNotRocketScience
240 × 50 mm39 parts2LMIT87
How designs wire the SSI2164
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the SSI2164 connects to, and the resistors, capacitors and other passives placed on it.
- The I_IN1 pin has a series resistor on 10 of 12 designs, most often 220 Ω (then 33 kΩ).
- The I_OUT1 pin has a series capacitor on 9 of 12 designs, most often 100 pF (then 470 pF).
- The I_OUT2 pin has a series capacitor on 9 of 12 designs, most often 100 pF (then 100 nF).
- The I_IN2 pin has a series resistor on 9 of 11 designs, most often 220 Ω (then 33 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MODEpin 1 | Connected to: Not connected 50% · a signal 42% |
|
| I_IN1pin 2 | Connected to: Signal 92% |
|
| VC1pin 3 | Connected to: Signal 100% |
|
| I_OUT1pin 4 | Connected to: TL074 33% · -15V 25% |
|
| I_OUT2pin 5 | Connected to: TL074 33% |
|
| VC2pin 6 | Connected to: A connector 27% |
|
| I_IN2pin 7 | Connected to: Signal 100% |
|
| GNDpin 8 | Connected to: GND 82% · 15V 18% | — |
| V-pin 9 | Connected to: -12V 89% |
|
| I_IN3pin 10 | Connected to: Signal 89% |
|
| VC3pin 11 | Connected to: TL074 22% |
|
| I_OUT3pin 12 | Connected to: TL074 44%, a connector 22%, TL072 22% |
|
| I_OUT4pin 13 | Connected to: TL074 44%, a connector 22% |
|
| VC4pin 14 | Connected to: A connector 22% |
|
| I_IN4pin 15 | Connected to: Signal 89% |
|
| V+pin 16 | Connected to: 12V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gamenight by ThisIsNotRocketScience, Eurorack 4XVCA Module by Len42, SSI2164 LPF plug in board by JordanAceto and DualTimbre by StudioKAT.
The SSI2164 in open source designs
The gallery holds 27 open source boards using the SSI2164 from 13 GitHub repositories; a typical one measures about 75 × 104 mm and carries around 123 components.
85% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is TiNRS - DuckTape by ThisIsNotRocketScience.
Parts used alongside the SSI2164
Microcontrollers on boards using the SSI2164
What boards using the SSI2164 are built for
SSI2164: common questions
Where can I find a SSI2164 reference design?
Each of the 27 boards on this page is a real design using the SSI2164. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SSI2164 I_IN1 pin?
The I_IN1 pin has a series resistor on 10 of 12 designs, most often 220 Ω (then 33 kΩ). Counted from the KiCad layouts of 12 open source designs using the SSI2164.
How is the SSI2164 I_OUT1 pin connected?
The I_OUT1 pin has a series capacitor on 9 of 12 designs, most often 100 pF (then 470 pF). Counted from the KiCad layouts of 12 open source designs using the SSI2164.
How is the SSI2164 I_OUT2 pin connected?
The I_OUT2 pin has a series capacitor on 9 of 12 designs, most often 100 pF (then 100 nF). Counted from the KiCad layouts of 12 open source designs using the SSI2164.
What parts are used alongside the SSI2164?
The TL072, TL074, LM13700 and LM4040DBZ-5 appear in the most repositories here.
Which microcontrollers do boards using the SSI2164 use?
Most are built on RP2040/RP2350 (6), STM32 (2) and ESP32 (1).
How big is a typical board using the SSI2164?
The median is 75 × 104 mm, and 85% are two-layer designs.
What is the most popular open source board using the SSI2164?
By GitHub stars, TiNRS - DuckTape by ThisIsNotRocketScience, with 87 stars.
Can I simulate one of these boards using the SSI2164 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.