5 open source boards using the STF202-22T1G
Real designs built with the STF202-22T1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp32-c3
TadeasFrycak
45.7 × 21.3 mm32 parts2LGPL-3.017Microchip SAM
Project-Mach-1
ImperialSpaceSociety
30.5 × 82.6 mm82 parts4LNo license12STM32
QuadMod Components
dchwebb
70.6 × 100 mm121 parts4LNo license3AVR/Arduino
ProyekKedaireka SHMS Bridge
farisalimmirzani365
100 × 100 mm221 parts2LNo license0Quango Controls
dchwebb
80.8 × 110 mm37 parts2LNo license5
How designs wire the STF202-22T1G
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STF202-22T1G connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 6 | Connected to: GND 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp32-c3 by TadeasFrycak, Project-Mach-1 by ImperialSpaceSociety, Quango Controls by dchwebb and QuadMod Components by dchwebb.
The STF202-22T1G in open source designs
The gallery holds 5 open source boards using the STF202-22T1G from 5 GitHub repositories; a typical one measures about 70.6 × 100 mm and carries around 82 components.
60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Esp32-c3 by TadeasFrycak.
Microcontrollers on boards using the STF202-22T1G
What boards using the STF202-22T1G are built for
STF202-22T1G: common questions
Where can I find a STF202-22T1G reference design?
Each of the 5 boards on this page is a real design using the STF202-22T1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STF202-22T1G use?
Most are built on AVR/Arduino (1), ESP32 (1), Microchip SAM (1) and STM32 (1).
How big is a typical board using the STF202-22T1G?
The median is 70.6 × 100 mm, and 60% are two-layer designs.
What is the most popular open source board using the STF202-22T1G?
By GitHub stars, Esp32-c3 by TadeasFrycak, with 17 stars.
Can I simulate one of these boards using the STF202-22T1G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.