7 open source boards using the STM32F103RETx
Real designs built with the STM32F103RETx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
OpenHand v3
AleksaHeler
100 × 50 mm181 parts4LMIT11STM32
Node base
LanternD
78 × 40 mm73 parts2LApache-2.06STM32
Dragon controller
Doc-Raptor
100 × 95 mm84 parts2LNo license3STM32
OpenHand v3
iamprince3
100 × 50 mm181 parts4LNo license0STM32
PMW3360-mouse hardware
ertjy
51 × 82 mm50 parts4LNo license0STM32
OTTO-main
cester-ino
247 × 81 mm142 parts4LGPL-3.049STM32
Logging
matatma23-gento
58 × 90 mm70 parts4LNo license0
How designs wire the STM32F103RETx
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32F103RETx connects to, and the resistors, capacitors and other passives placed on it.
- The PD0 pin has a crystal on 6 of 7 designs, most often 16 MHz (then 8 MHz).
- The PD0 pin has a capacitor to GND on 6 of 7 designs, most often 10 pF (then 20 pF).
- The PD1 pin has a crystal on 6 of 7 designs, most often 16 MHz (then 8 MHz).
- The PD1 pin has a capacitor to GND on 6 of 7 designs, most often 10 pF (then 20 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 57% · not connected 29% |
|
| PD0pin 5 | Connected to: Signal 100% |
|
| PD1pin 6 | Connected to: Signal 86% |
|
| NRSTpin 7 | Connected to: A connector 29% |
|
| VSSApin 12 | Connected to: GND 86% | — |
| VDDApin 13 | Connected to: 3.3V 83% · a signal 17% |
|
| PA0pin 14 | Connected to: Not connected 50% · a signal 50% |
|
| PA1pin 15 | Connected to: Not connected 50% · a signal 50% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 48, 64 | Connected to: 3.3V 100% |
|
| PA6pin 22 | Connected to: Signal 67% · not connected 33% |
|
| PA7pin 23 | Connected to: Signal 67% · not connected 33% |
|
| PC4pin 24 | Connected to: Signal 67% · not connected 33% |
|
| PC5pin 25 | Connected to: Signal 67% · not connected 33% |
|
| PB0pin 26 | Connected to: Not connected 50% · a signal 50% |
|
| PB2pin 28 | Connected to: DRV8833PWP 33% · not connected 33% |
|
| PB10pin 29 | Connected to: DRV8833PWP 33% · not connected 33% |
|
| PB11pin 30 | Connected to: DRV8833PWP 33% · not connected 33% |
|
| PA12pin 45 | Connected to: A connector 67% · not connected 17% |
|
| PA15pin 50 | Connected to: A connector 33% · not connected 33% |
|
| PC12pin 53 | Connected to: A connector 50%, DRV8833PWP 33% · not connected 17% |
|
| PB6pin 58 | Connected to: A connector 50% · not connected 17% |
|
| PB7pin 59 | Connected to: A connector 50% · not connected 17% |
|
| BOOT0pin 60 | Connected to: Signal 83% · not connected 17% |
|
| PB8pin 61 | Connected to: A connector 33% · not connected 17% |
|
| PB9pin 62 | Connected to: A connector 33% · not connected 17% |
|
32 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OTTO-main by cester-ino, OpenHand v3 by AleksaHeler, Bc26 bc66 module board by LanternD and Dragon controller by Doc-Raptor.
The STM32F103RETx in open source designs
The gallery holds 7 open source boards using the STM32F103RETx from 7 GitHub repositories; a typical one measures about 100 × 81 mm and carries around 84 components.
71% use four copper layers or more, and 43% carry an open source license.
The most starred is OTTO-main by cester-ino.
Parts used alongside the STM32F103RETx
Microcontrollers on boards using the STM32F103RETx
What boards using the STM32F103RETx are built for
STM32F103RETx: common questions
Where can I find a STM32F103RETx reference design?
Each of the 7 boards on this page is a real design using the STM32F103RETx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F103RETx PD0 pin connected?
The PD0 pin has a crystal on 6 of 7 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 7 open source designs using the STM32F103RETx.
How is the STM32F103RETx PD1 pin connected?
The PD1 pin has a crystal on 6 of 7 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 7 open source designs using the STM32F103RETx.
What decoupling capacitors do designs use on the STM32F103RETx VDD pin?
The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F103RETx.
What parts are used alongside the STM32F103RETx?
The AMS1117-3.3, DRV8833PWP, ICL7660, TL084 and TPS565201DDCR appear in the most repositories here.
Which microcontrollers do boards using the STM32F103RETx use?
Most are built on STM32 (7).
How big is a typical board using the STM32F103RETx?
The median is 100 × 81 mm, and 29% are two-layer designs.
What is the most popular open source board using the STM32F103RETx?
By GitHub stars, OTTO-main by cester-ino, with 49 stars.
Can I simulate one of these boards using the STM32F103RETx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.