6 open source boards using the STM32F105RBT6
Real designs built with the STM32F105RBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
OpenFlops
SukkoPera
111.6 × 59.4 mm76 parts2LCustom license376STM32
LMS8001-Companion
myriadrf
75.9 × 96 mm350 partsNo license36STM32
OpenFlops-W1D
silvervest
95 × 116 mm49 parts2LCustom license26STM32
HenryFlops
hmerrett
111.6 × 59.4 mm77 parts2LCustom license15STM32
Nano-Tek
stefanskotte
51 × 42 mm41 parts4LNo license7STM32
Can repeater
sufst
69.5 × 27.7 mm53 parts4LGPL-3.019
How designs wire the STM32F105RBT6
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F105RBT6 connects to, and the resistors, capacitors and other passives placed on it.
- The PD0 pin has a crystal on 5 of 6 designs, most often 8 MHz.
- The PD0 pin has a capacitor to GND on 5 of 6 designs, most often 22 pF (then 20 pF).
- The NRST pin has a capacitor to GND on 5 of 6 designs, most often 100 nF.
- The NRST pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 67% · not connected 33% |
|
| PD0pin 5 | Connected to: Signal 83% · not connected 17% |
|
| PD1pin 6 | Connected to: Signal 83% · not connected 17% |
|
| NRSTpin 7 | Connected to: A connector 100% |
|
| PC0pin 8 | Connected to: Not connected 83% · a signal 17% | — |
| PC1pin 9 | Connected to: Not connected 83% · a signal 17% | — |
| PC2pin 10 | Connected to: Not connected 100% | — |
| PC3pin 11 | Connected to: Not connected 100% | — |
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: 3.3V 83% · not connected 17% |
|
| PA0pin 14 | Connected to: A connector 33% · not connected 17% |
|
| PA1pin 15 | Connected to: A connector 67% · not connected 17% |
|
| PA2pin 16 | Connected to: Signal 83% · not connected 17% |
|
| PA3pin 17 | Connected to: Not connected 50% · a signal 50% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 48, 64 | Connected to: 3.3V 83% · not connected 17% |
|
| PA4pin 20 | Connected to: Not connected 83% · a signal 17% | — |
| PA5pin 21 | Connected to: Not connected 83% · a signal 17% | — |
| PA6pin 22 | Connected to: Not connected 83% · a signal 17% | — |
| PC4pin 24 | Connected to: Not connected 83% · a signal 17% | — |
| PC5pin 25 | Connected to: Not connected 67% · a signal 33% | — |
| PB0pin 26 | Connected to: A connector 67% · not connected 17% |
|
| PB2pin 28 | Connected to: Signal 83% · GND 17% |
|
| PB10pin 29 | Connected to: A connector 67% · not connected 33% |
|
| PB11pin 30 | Connected to: A connector 67% · not connected 33% |
|
| PB14pin 35 | Connected to: Not connected 67% · a signal 33% | — |
| PB15pin 36 | Connected to: Not connected 67% · a signal 33% | — |
| PC7pin 38 | Connected to: Not connected 67% · a signal 33% | — |
| PC8pin 39 | Connected to: Not connected 67% · a signal 33% | — |
| PC9pin 40 | Connected to: Not connected 83% · a signal 17% | — |
| PA8pin 41 | Connected to: A connector 83% · not connected 17% |
|
| PA11pin 44 | Connected to: Signal 83% · not connected 17% |
|
| PA12pin 45 | Connected to: Signal 83% · not connected 17% |
|
| PA15pin 50 | Connected to: A connector 67% · not connected 17% |
|
| PC10pin 51 | Connected to: Not connected 67% · a signal 33% | — |
| PC11pin 52 | Connected to: Not connected 67% · a signal 33% | — |
| PC12pin 53 | Connected to: Not connected 67% · GND 33% | — |
| PD2pin 54 | Connected to: Not connected 83% · a signal 17% | — |
| PB4pin 56 | Connected to: A connector 67% · not connected 17% |
|
| BOOT0pin 60 | Connected to: A connector 67% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenFlops by SukkoPera, LMS8001-Companion by myriadrf, OpenFlops-W1D by silvervest and Can repeater by sufst.
The STM32F105RBT6 in open source designs
The gallery holds 6 open source boards using the STM32F105RBT6 from 6 GitHub repositories; a typical one measures about 85.4 × 59.4 mm and carries around 65 components.
60% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is OpenFlops by SukkoPera.
Parts used alongside the STM32F105RBT6
Microcontrollers on boards using the STM32F105RBT6
What boards using the STM32F105RBT6 are built for
STM32F105RBT6: common questions
Where can I find a STM32F105RBT6 reference design?
Each of the 6 boards on this page is a real design using the STM32F105RBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F105RBT6 PD0 pin connected?
The PD0 pin has a crystal on 5 of 6 designs, most often 8 MHz. Counted from the KiCad layouts of 6 open source designs using the STM32F105RBT6.
How is the STM32F105RBT6 NRST pin connected?
The NRST pin has a capacitor to GND on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the STM32F105RBT6.
How is the STM32F105RBT6 PC2 pin connected?
The PC2 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the STM32F105RBT6.
Which microcontrollers do boards using the STM32F105RBT6 use?
Most are built on STM32 (6).
How big is a typical board using the STM32F105RBT6?
The median is 85.4 × 59.4 mm, and 60% are two-layer designs.
What is the most popular open source board using the STM32F105RBT6?
By GitHub stars, OpenFlops by SukkoPera, with 376 stars.
Can I simulate one of these boards using the STM32F105RBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.