8 open source boards using the STM32F427VGT6

Real designs built with the STM32F427VGT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The STM32F427VGT6 in open source designs

The gallery holds 8 open source boards using the STM32F427VGT6 from 4 GitHub repositories; a typical one measures about 88 × 113.8 mm and carries around 235 components.

88% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.

The most starred is Micro rusEFI by rusefi.

Parts used alongside the STM32F427VGT6

Microcontrollers on boards using the STM32F427VGT6

What boards using the STM32F427VGT6 are built for

STM32F427VGT6: common questions

Where can I find a STM32F427VGT6 reference design?

Each of the 8 boards on this page is a real design using the STM32F427VGT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the STM32F427VGT6?

The LM1117-3.3, MIC4427, TLE9201SG, VNLD5090 and W25Q128JVSIQ appear in the most repositories here.

Which microcontrollers do boards using the STM32F427VGT6 use?

Most are built on STM32 (8).

How big is a typical board using the STM32F427VGT6?

The median is 88 × 113.8 mm, and 88% are two-layer designs.

What is the most popular open source board using the STM32F427VGT6?

By GitHub stars, Micro rusEFI by rusefi, with 98 stars.

Can I simulate one of these boards using the STM32F427VGT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part