7 open source boards using the STM32G030C8T6

Real designs built with the STM32G030C8T6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the STM32G030C8T6

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32G030C8T6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF).
  • The VREF+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF).
  • The VDD/VDDA pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF).
  • The PC14-OSC32_IN pin is left unconnected on 4 of 5 designs.
PC14-OSC32_INpin 2Connected to: Not connected 80% · a signal 20%
PC15-OSC32_OUTpin 3Connected to: Not connected 80% · a signal 20%
VBATpin 4Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (9), 4.7 µF (2), 10 µF (1)
VREF+pin 5Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (8), 4.7 µF (2), 10 µF (1)
VDD/VDDApin 6Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (8), 4.7 µF (2), 10 µF (1)
VSS/VSSApin 7Connected to: GND 100%
PF0-OSC_INpin 8Connected to: Signal 60% · not connected 40%
  • Crystal on 60% · 16 MHz (1)
  • Capacitor to GND on 60% · 10 pF (2), 12 pF (1)
PF1-OSC_OUTpin 9Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 470 Ω (1), 47 Ω (1)
NRSTpin 10Connected to: A connector 60%
  • Capacitor to GND on 60% · 100 nF (3)
PA0pin 11Connected to: Not connected 80% · a signal 20%
PA2pin 13Connected to: Signal 100%
  • Series resistor on 40% · 10 kΩ (1)
PA3pin 14Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 10 kΩ (1)
PA4pin 15Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 10 kΩ (1), 1 kΩ (1)
PA5pin 16Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 10 kΩ (1), 1 kΩ (1)
PA6pin 17Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 10 kΩ (1), 1 kΩ (1)
PA7pin 18Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 10 kΩ (1), 1 kΩ (1)
PB15pin 27Connected to: Not connected 60% · a signal 40%
PA9pin 29Connected to: A connector 60%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (1)
PC6pin 30Connected to: Not connected 60% · a signal 40%
PC7pin 31Connected to: Not connected 60% · a signal 40%
PA10pin 32Connected to: A connector 60% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (1)
PA11[PA9]pin 33Connected to: Not connected 80% · a signal 20%
PA12[PA10]pin 34Connected to: Not connected 80% · a signal 20%
PA15pin 37Connected to: Not connected 60% · a signal 40%
PB3pin 42Connected to: Not connected 60% · a signal 40%
PB4pin 43Connected to: A connector 40% · not connected 20%
  • Series resistor on 40% · 4.7 kΩ (1)
PB5pin 44Connected to: A connector 40%
  • Series resistor on 60% · 4.7 kΩ (2), 100 Ω (1)
PB6pin 45Connected to: A connector 40% · not connected 20%
  • Series resistor on 60% · 4.7 kΩ (1), 100 Ω (1), 10 kΩ (1)
PB7pin 46Connected to: A connector 40% · not connected 20%
  • Series resistor on 60% · 4.7 kΩ (1), 100 Ω (1), 10 kΩ (1)
PB8pin 47Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 4.7 kΩ (1), 100 Ω (1)
PB9pin 48Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 4.7 kΩ (1), 100 Ω (1)

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Taiko-256 by AnalogDragon, PiZumo Robot by wallComputer, Jantteri hit detector by OJ2016 and Keyboard rs485 by nguyenduchan.

The STM32G030C8T6 in open source designs

The gallery holds 7 open source boards using the STM32G030C8T6 from 6 GitHub repositories; a typical one measures about 100 × 91.5 mm and carries around 82 components.

83% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.

The most starred is Taiko-256 by AnalogDragon.

Parts used alongside the STM32G030C8T6

Microcontrollers on boards using the STM32G030C8T6

STM32G030C8T6: common questions

Where can I find a STM32G030C8T6 reference design?

Each of the 7 boards on this page is a real design using the STM32G030C8T6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G030C8T6 VBAT pin?

The VBAT pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32G030C8T6.

What decoupling capacitors do designs use on the STM32G030C8T6 VREF+ pin?

The VREF+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32G030C8T6.

What decoupling capacitors do designs use on the STM32G030C8T6 VDD/VDDA pin?

The VDD/VDDA pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32G030C8T6.

Which microcontrollers do boards using the STM32G030C8T6 use?

Most are built on STM32 (7).

How big is a typical board using the STM32G030C8T6?

The median is 100 × 91.5 mm, and 83% are two-layer designs.

What is the most popular open source board using the STM32G030C8T6?

By GitHub stars, Taiko-256 by AnalogDragon, with 7 stars.

Can I simulate one of these boards using the STM32G030C8T6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part