7 open source boards using the Teensy4.0_AudioShield_REVD
Real designs built with the Teensy4.0_AudioShield_REVD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Ns-1
FerretCode
172 × 135 mm64 parts4LNo license0NXP
DSP-Guitar-MultiFX
MahmoudBasio
133.6 × 112.9 mm42 parts2LMIT0NXP
Midi-Thing
NestOfGhosts
136 × 96 mm16 parts2LNo license0AVR/Arduino
BMS MK2 attempt 1-using-Tp4506
Wierdwizard2587
226.6 × 64 mm42 parts2LNo license1AVR/Arduino
4s2p 18650 Mount, BMS with Power Distribution Circuit
Wierdwizard2587
165.7 × 94.8 mm36 parts2LNo license1NXP
AFPI Device V1.1
Wierdwizard2587
85 × 45 mm28 parts2LNo license1AVR/Arduino
Bms test circuit
Wierdwizard2587
94.5 × 58.4 mm27 parts2LNo license1
The Teensy4.0_AudioShield_REVD in open source designs
The gallery holds 7 open source boards using the Teensy4.0_AudioShield_REVD from 4 GitHub repositories; a typical one measures about 136 × 94.8 mm and carries around 36 components.
86% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is BMS MK2 attempt 1-using-Tp4506 by Wierdwizard2587.
Microcontrollers on boards using the Teensy4.0_AudioShield_REVD
What boards using the Teensy4.0_AudioShield_REVD are built for
Teensy4.0_AudioShield_REVD: common questions
Where can I find a Teensy4.0_AudioShield_REVD reference design?
Each of the 7 boards on this page is a real design using the Teensy4.0_AudioShield_REVD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy4.0_AudioShield_REVD use?
Most are built on NXP (4) and AVR/Arduino (3).
How big is a typical board using the Teensy4.0_AudioShield_REVD?
The median is 136 × 94.8 mm, and 86% are two-layer designs.
What is the most popular open source board using the Teensy4.0_AudioShield_REVD?
By GitHub stars, BMS MK2 attempt 1-using-Tp4506 by Wierdwizard2587, with 1 stars.
Can I simulate one of these boards using the Teensy4.0_AudioShield_REVD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.