9 open source boards using the THS7374IPWR
Real designs built with the THS7374IPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Neptune
Board-Folk
191.2 × 190.9 mm372 parts4LNo license175Duplicanator-Scart-Duplicator
KabukiFlux
70 × 81 mm41 parts2LMIT12Amiga RGB video splitter
jbilander
60.5 × 60 mm28 parts2LCC-BY-SA-4.04RP2040/RP2350
PCE colorlight carrier
supermomo31
180 × 160 mm253 parts4LNo license0Video-Amplifier
gheadcn
55.9 × 38.1 mm24 parts2LMIT0Avboard smt
clydeshaffer
177 × 152.1 mm149 parts4LNo license146TMSRGBCustom Hat v1 for JFF
herraa1
56 × 58 mm46 parts2LGPL-3.02Avboard tht2
clydeshaffer
177 × 152.1 mm130 parts4LNo license1464bp NOZIFF MD9
RIP-Felix
38.8 × 47.4 mm108 parts2LCERN-OHL-S-2.049
How designs wire the THS7374IPWR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the THS7374IPWR connects to, and the resistors, capacitors and other passives placed on it.
- The CH3_OUT pin has a series resistor on 7 of 8 designs, most often 75 Ω.
- The CH2_OUT pin has a series resistor on 7 of 8 designs, most often 75 Ω.
- The CH1_IN pin has a series capacitor on 6 of 8 designs, most often 100 nF (then 100 pF).
- The VS+ pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CH1_INpin 1 | Connected to: Signal 100% |
|
| CH2_INpin 2 | Connected to: Signal 88% |
|
| CH3_INpin 3 | Connected to: Signal 88% |
|
| CH4_INpin 4 | Connected to: Signal 75% |
|
| GNDpin 5 | Connected to: GND 100% | — |
| DISABLEpin 6 | Connected to: GND 88% | — |
| NCpin 7, 8 | Connected to: Not connected 100% | — |
| VS+pin 10 | Connected to: 5V 100% |
|
| CH4_OUTpin 11 | Connected to: Signal 75% · not connected 25% |
|
| CH3_OUTpin 12 | Connected to: A connector 25% |
|
| CH2_OUTpin 13 | Connected to: A connector 25% |
|
| CH1_OUTpin 14 | Connected to: Signal 88% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neptune by Board-Folk, Avboard smt by clydeshaffer, 4bp NOZIFF MD9 by RIP-Felix and Duplicanator-Scart-Duplicator by KabukiFlux.
The THS7374IPWR in open source designs
The gallery holds 9 open source boards using the THS7374IPWR from 8 GitHub repositories; a typical one measures about 70 × 81 mm and carries around 108 components.
56% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Neptune by Board-Folk.
Microcontrollers on boards using the THS7374IPWR
What boards using the THS7374IPWR are built for
THS7374IPWR: common questions
Where can I find a THS7374IPWR reference design?
Each of the 9 boards on this page is a real design using the THS7374IPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the THS7374IPWR CH3_OUT pin?
The CH3_OUT pin has a series resistor on 7 of 8 designs, most often 75 Ω. Counted from the KiCad layouts of 8 open source designs using the THS7374IPWR.
What resistor goes on the THS7374IPWR CH2_OUT pin?
The CH2_OUT pin has a series resistor on 7 of 8 designs, most often 75 Ω. Counted from the KiCad layouts of 8 open source designs using the THS7374IPWR.
How is the THS7374IPWR CH1_IN pin connected?
The CH1_IN pin has a series capacitor on 6 of 8 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 8 open source designs using the THS7374IPWR.
Which microcontrollers do boards using the THS7374IPWR use?
Most are built on PIC (1) and RP2040/RP2350 (1).
How big is a typical board using the THS7374IPWR?
The median is 70 × 81 mm, and 56% are two-layer designs.
What is the most popular open source board using the THS7374IPWR?
By GitHub stars, Neptune by Board-Folk, with 175 stars.
Can I simulate one of these boards using the THS7374IPWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.