4 open source boards using the TLV73325PDBV
Real designs built with the TLV73325PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Basic ecp5
mattvenn
100 × 68 mm62 parts4LCC0-1.0143FPGA
Spla
khaydarian
165 × 107 mm252 parts4LNo license32RP2040/RP2350
Greybadge25
NUSGreyhats
75 × 99 mm126 parts2LNo license0Si4-hat
aliadnani
31.5 × 47.5 mm44 parts4LNo license0
The TLV73325PDBV in open source designs
The gallery holds 4 open source boards using the TLV73325PDBV from 4 GitHub repositories; a typical one measures about 87.5 × 83.5 mm and carries around 94 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is Basic ecp5-pcb by mattvenn.
Parts used alongside the TLV73325PDBV
Microcontrollers on boards using the TLV73325PDBV
What boards using the TLV73325PDBV are built for
TLV73325PDBV: common questions
Where can I find a TLV73325PDBV reference design?
Each of the 4 boards on this page is a real design using the TLV73325PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV73325PDBV use?
Most are built on FPGA (2) and RP2040/RP2350 (1).
How big is a typical board using the TLV73325PDBV?
The median is 87.5 × 83.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the TLV73325PDBV?
By GitHub stars, Basic ecp5-pcb by mattvenn, with 143 stars.
Can I simulate one of these boards using the TLV73325PDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.