5 open source boards using the TLV73311PDBV

Real designs built with the TLV73311PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The TLV73311PDBV in open source designs

The gallery holds 5 open source boards using the TLV73311PDBV from 4 GitHub repositories; a typical one measures about 125 × 125 mm and carries around 166 components.

80% use four copper layers or more, and 40% carry an open source license.

The most starred is Spla by khaydarian.

Parts used alongside the TLV73311PDBV

Microcontrollers on boards using the TLV73311PDBV

TLV73311PDBV: common questions

Where can I find a TLV73311PDBV reference design?

Each of the 5 boards on this page is a real design using the TLV73311PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TLV73311PDBV use?

Most are built on Raspberry Pi (2), FPGA (1) and RP2040/RP2350 (1).

How big is a typical board using the TLV73311PDBV?

The median is 125 × 125 mm, and 20% are two-layer designs.

What is the most popular open source board using the TLV73311PDBV?

By GitHub stars, Spla by khaydarian, with 32 stars.

Can I simulate one of these boards using the TLV73311PDBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part