9 open source boards using the TMUX1574PWR
Real designs built with the TMUX1574PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sdmux4
hnz1102
68.3 × 57.7 mm115 parts2LMIT16RP2040/RP2350
Dut hub hw
Netlist-Studio
100 × 155 mm147 parts4LCERN-OHL-S-2.011Shared usb memory
hnz1102
50 × 40 mm83 parts2LNo license2Raspberry Pi
Motherboard
mikegoelzer
152.4 × 76.2 mm151 parts4LCustom license0STM32
OBC
HernanIbarra60
81 × 81 mm118 parts4LNo license0ESP32
Phase3-routed review
skywalker0507
92 × 48 mm70 parts4LNo license0Sdcdmuxemmc
hnz1102
68.3 × 57.8 mm107 parts2LMIT16ESP32
Phase4-jlcpcb review
skywalker0507
92 × 48 mm70 parts4LNo license0ESP32
Remote flash probe
skywalker0507
92 × 48 mm70 parts4LNo license0
How designs wire the TMUX1574PWR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TMUX1574PWR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- The EN pin is tied to GND on 5 of 6 designs.
- The SEL pin has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SELpin 1 | Connected to: TMUX1574PWR 67%, the microcontroller 33% · GND 17% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| ENpin 15 | Connected to: GND 83% · a signal 17% | — |
| VDDpin 16 | Connected to: 3.3V 83% · a signal 17% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sdcdmuxemmc by hnz1102, Dut hub hw by Netlist-Studio, Shared usb memory by hnz1102 and OBC by HernanIbarra60.
The TMUX1574PWR in open source designs
The gallery holds 9 open source boards using the TMUX1574PWR from 6 GitHub repositories; a typical one measures about 92 × 57.7 mm and carries around 107 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is Sdmux4 by hnz1102.
Parts used alongside the TMUX1574PWR
Microcontrollers on boards using the TMUX1574PWR
What boards using the TMUX1574PWR are built for
TMUX1574PWR: common questions
Where can I find a TMUX1574PWR reference design?
Each of the 9 boards on this page is a real design using the TMUX1574PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TMUX1574PWR VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TMUX1574PWR.
How is the TMUX1574PWR EN pin connected?
The EN pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TMUX1574PWR.
What pull-up resistor is used on the TMUX1574PWR SEL pin?
The SEL pin has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the TMUX1574PWR.
What parts are used alongside the TMUX1574PWR?
The 74AHC1G14, EM32VSUKN, USBLC6-2SC6 and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the TMUX1574PWR use?
Most are built on ESP32 (3), Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TMUX1574PWR?
The median is 92 × 57.7 mm, and 33% are two-layer designs.
What is the most popular open source board using the TMUX1574PWR?
By GitHub stars, Sdmux4 by hnz1102, with 16 stars.
Can I simulate one of these boards using the TMUX1574PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.