22 open source boards using the TPS22918
Real designs built with the TPS22918, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vna mm synth
loxodes
314.5 × 201 mm428 parts6LNo license205AVR/Arduino
RetroPie Power Board v1a
baldengineer
122 × 112 mm59 parts2LNo license21ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0Power sub systems
Eng-Claire
82 × 60 mm48 parts2LNo license0-Super-Mikrobus-Cape-Testbed
8aChristian
220 × 160 mm38 parts4LNo license0Modular-Power-USBC
domesticmouse
52 × 24 mm23 parts2LCERN-OHL-S-2.00- schematic only · 21 parts
Vara
VirajSanghani
21 partsCustom license0 STM32
Jr DiveCANHead
QuickRecon
68 × 31.8 mm79 parts2LMIT13ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0STM32
ControlBoard
melair
98 × 58 mm88 parts4LNo license5ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0Sequencing ltc2937
loxodes
58 × 56 mm153 parts4LNo license205STM32
Backplane
melair
40 × 100 mm78 parts4LNo license5ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0
How designs wire the TPS22918
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS22918 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN_1 pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIN_1pin 1 | Connected to: 5V 88% |
|
| GND_2pin 2 | Connected to: GND 88% | — |
| ON_3pin 3 | Connected to: A connector 25% · VBUS_EN 25% |
|
| CT_4pin 4 | Connected to: Not connected 38% · GND 25% · a signal 38% |
|
| VOUT_6pin 6 | Connected to: A connector 50% · VBUS 25% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sequencing ltc2937 by loxodes, RetroPie Power Board v1a by baldengineer, Jr DiveCANHead by QuickRecon and Backplane by melair.
The TPS22918 in open source designs
The gallery holds 22 open source boards using the TPS22918 from 9 GitHub repositories; a typical one measures about 55 × 84 mm and carries around 106 components.
81% use four copper layers or more, and 64% carry an open source license.
The most starred is Vna mm synth by loxodes.
Parts used alongside the TPS22918
Microcontrollers on boards using the TPS22918
What boards using the TPS22918 are built for
TPS22918: common questions
Where can I find a TPS22918 reference design?
Each of the 22 boards on this page is a real design using the TPS22918. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TPS22918 VIN_1 pin?
The VIN_1 pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the TPS22918.
Which microcontrollers do boards using the TPS22918 use?
Most are built on ESP32 (12), STM32 (3) and AVR/Arduino (1).
How big is a typical board using the TPS22918?
The median is 55 × 84 mm, and 19% are two-layer designs.
What is the most popular open source board using the TPS22918?
By GitHub stars, Vna mm synth by loxodes, with 205 stars.
Can I simulate one of these boards using the TPS22918 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.