6 open source boards using the TPS25751DREFR

Real designs built with the TPS25751DREFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The TPS25751DREFR in open source designs

The gallery holds 6 open source boards using the TPS25751DREFR from 5 GitHub repositories; a typical one measures about 115.8 × 122.5 mm and carries around 294 components.

67% use four copper layers or more, and 50% carry an open source license.

The most starred is Parsnip by LimesKey.

Parts used alongside the TPS25751DREFR

Microcontrollers on boards using the TPS25751DREFR

TPS25751DREFR: common questions

Where can I find a TPS25751DREFR reference design?

Each of the 6 boards on this page is a real design using the TPS25751DREFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS25751DREFR?

The BQ25792RQMR, BQ25798RQMR and M24512-DFMC6TG appear in the most repositories here.

Which microcontrollers do boards using the TPS25751DREFR use?

Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the TPS25751DREFR?

The median is 115.8 × 122.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the TPS25751DREFR?

By GitHub stars, Parsnip by LimesKey, with 4 stars.

Can I simulate one of these boards using the TPS25751DREFR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part